ConiuGo 700100107 EasyGuard II 700100107 Manual Do Utilizador

Códigos do produto

700100107

Revision 9.0

GSM Alarm & Telemetry systems

SMS:

This means the incoming SMS which will be sended from an external

mobile phone to the module.

1 : Incoming SMS is important for this action

0 : Incoming SMS is not important for this action

X : The incoming SMS will be ignored and is not neccessary for

this action

HZeit:

This is only important for the digital outputs (relais contacts) and

shows whether there is an hold time activated. The hold time defines

the time how long (1 – 9999 seconds) the output will be triggered in

case of this action. Also possible is permanent switching of the output

because of the integrated bistable relais.

Please note that in case of switching on or off of devices it is

possible that you could not connect the module in case of the

loss of the GSM network. You must be sure that no dangerous

working parameter of this devices could occure in the time of

the lost of the GSM network.

This means the retrigger mode. If an event is activ and an action will be

triggered on the digital outputs (relais contacts), the ralsi is so long activ

as it is given in the predefined hold time (e.g. 60 seconds). Is there a

further incoming signal on the input, the hold time will automatically re-

triggered up to 60 seconds.

NAME:

Shows the actual name of this connection. The name is taken from the

settings which are pre defined in the “Input settings”.

Please set every input value which are not needed to X. Thies

means the digital inpust as well as the analoge inputs, power

good, time frames, GSM status and incoming SMS.

You must choose the number of the connection which you need to change. After this

the systems ask you for every possible changing in the line of the choosen connec-

tion.