Cypress Semiconductor CapSense® Controller kit CY3280-BK1 CY3280-BK1 CY3280-BK1 Manual Do Utilizador

CY3280-BK1 Universal CapSense Controller Quick Start, Doc. # 001-37959 Rev. **

23

Create a PSoC Designer CapSense Project

5.41 Connect your computer to the CapSense test board ISSP Connector (J3) using the PSoC Mini-

Prog and a USB cable. If this is your first time using the MiniProg, you will need to install the 
driver before proceeding. Follow the instructions in the Power the Board section on page 4.

5.42 In PSoC Designer, select Program 

 Program Part.The PSoC Programmer application 

opens.

5.43 From the Port menu, select MiniProg1/<Identification Code>.

5.44 Click Program. "Programming Succeeded..." appears in the Actions pane when programming 

is complete.

5.45 Click Toggle Device Power.

5.46 Touch the sensor P2[3] on the board with your finger. The LED P1[2] will light up.

5.47 When you are done, click Toggle Device Power, and close PSoC Programmer.

5.48 Return to PSoC Designer and select File 

 Save Project.

You have now completed the PSoC Designer CapSense project. There is a complete project that 
implements buttons and a slider available on the CD. To use these projects, the project folders need 
to be copied from the CD to a directory on a PC that has PSoC Designer installed. After copying the 
files, ensure that the parent folder attributes are not Read-only by following these steps:

5.49 Right-click the parent project folder.

5.50 Select Properties.

5.51 Ensure that the Read-only attribute is not checked.

5.52 Click OK.