Cypress Semiconductor Cy8CKIT-050 Cy8CKIT-050B Manual Do Utilizador

40

CY8CKIT-050 PSoC® 5LP Development Kit Guide, Doc. # 001-65816 Rev. *E

Code Examples

5.5.2

Hardware Connections

This project uses the LCD for display; therefore, ensure that it is plugged into the port. No specific
hardware connections are required for this project because all connections are hard-wired on the
board. 

5.5.3

Verify Output

Build and program the code example, and reset the device. The LCD displays the status of the two
buttons as On/Off. The LCD also shows the slider touch position as a percentage. When you touch a
button, the LCD displays ON; when you remove the finger from the button, the LCD displays OFF.
When the slider is touched, the corresponding finger position is displayed as a percentage on the
LCD.

Figure 5-9.  CapSense Slider