Sanyo PLC-ET30L PLCET30L Manual Do Utilizador

Códigos do produto

PLCET30L

Press the ON/STAND-BY button on the top control

or the STAND-BY button on the remote control, and

“Power off?” appears on the screen.

Press the ON/STAND-BY button or the STAND-BY button

on the remote control again to turn off the projector.

The LAMP indicator turns off and the POWER indicator

starts to blink green. After the projector is turned off,

the cooling fans operates for 90 seconds. During the

POWER indicator is blinking, you cannot turn on the

projector.

TO MAINTAIN LIFE OF THE LAMP, ONCE YOU

TURN THE PROJECTOR ON, WAIT AT LEAST FIVE

MINUTES BEFORE TURNING IT OFF.

DO NOT UNPLUG THE AC POWER CORD WHILE

THE COOLING FANS ARE RUNNING OR BEFORE

THE POWER INDICATOR STOPS BLINKING.

OTHERWISE IT WILL RESULT IN SHORTENING

THE LAMP LIFE.

When the projector has cooled down enough, the

POWER indicator stops blinking and you can turn

on the projector. After it is cooled down completely,

unplug the AC power cord.

“Power off?” disappears after 4 seconds.

✔

Note:

• When the On start function is set to “On,” the

projector will be turned on automatically by
connecting the AC power cord to an AC outlet (p.53).

• The running speed of cooling fans is changed

according to the temperature inside the projector.

• Do not put the projector in a case before the

projector is cooled enough.

• If the WARNING TEMP. indicator blinks or all the

five indicators on the top panel blink, see “Warning
Indicators” on page 61.

• While the POWER indicator is blinking, the lamp

is being cooled down and the projector cannot be
turned on. Wait until the POWER indicator stops
blinking to turn on the projector again.

Turning Off the Projector

DO NOT OPERATE THE PROJECTOR

CONTINUOUSLY WITHOUT REST. CONTINUOUS

USE MAY RESULT IN SHORTENING THE LAMP

LIFE. TURN OFF THE PROJECTOR AND LET

STAND FOR ABOUT AN HOUR IN EVERY 24

HOURS.

Basic Operation