Sanyo PLC-ET30L PLCET30L Manual Do Utilizador
Códigos do produto
PLCET30L
40
Use the Point
7 8
buttons to adjust the horizontal area
displayed by this projector.
Display area H
Use the Point
7 8
buttons to adjust the vertical area
displayed by this projector.
Display area V
Reset
Store
Exit the PC Adjust Menu.
Quit
To store the adjusted data, select Store and then press the
SELECT button. Move the red arrow pointer to one of the
Modes 1 to 10 in which you want to store, and then press
the SELECT button.
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.
Mode free
Vacant
Values of “Total dots,”
“Horizontal,” “Vertical,”
“Display area H,” and
“Display area V.”
“Horizontal,” “Vertical,”
“Display area H,” and
“Display area V.”
Close this dialog box.
To clear the stored data, select Mode free and then press
the SELECT button. Move the red arrow pointer to the
Mode that you want to clear and then press the SELECT
button.
✔
Note:
• Display area (H/V) cannot be selected when 480i,
575i, 480p, 575p, 720p, 1035i, or 1080i is selected in
the PC System Menu (p.37).
the PC System Menu (p.37).
• PC Adjust Menu cannot be selected when Input
1[RGB (PC digital)] is selected in the Input Menu
(p.35).
(p.35).
Move the red frame pointer to
the desired item and press the
SELECT button.
the desired item and press the
SELECT button.
To clear the adjusted data
This Mode has
stored parameters.
stored parameters.
To store the adjusted data
Computer Adjustment