Sanyo PLC-ET30L PLCET30L Manual Do Utilizador

Provide the image to fit the screen size.

Provide the image in its original size. When the original 

image size is larger than the screen size (1400 x 1050), the 

projector enters to the panning mode automatically. Use the 

Point 

ed7 8

 buttons to pan the image. When adjusted, the 

arrows will turn red. When reached to the correction limits, 

the arrows will disappear.

Provide the image to fit the wide video aspect ratio (16:9) by 

expanding the image width uniformly. This function can be 

used for providing a squeezed video signal at 16:9.

Provide the full screen image. 

Select the desired screen size that conforms to the input signal source.

Move the red frame pointer 
to the desired function and 
press the SELECT button.

Screen Menu icon

Adjust the screen scale and position manually with this 

function.

Press the SELECT button at Custom and the “Custom” is 

displayed on the screen for a few seconds and then the 

Aspect dialog box appears.

  Scale H/V ...........  Adjust the Horizontal/Vertical screen scale.

  H&V ...................  When set to “On,” the aspect ratio is 

fixed. The “Scale V” appears dimmed and 

becomes unavailable. Adjust “Scale H,” 

then the screen scale is automatically 

modified based on the aspect ratio. 

  Position H/V .......  Adjust the Horizontal/Vertical screen 

position.

  Common ............  Save the adjusted scale to all the inputs. 

Press the SELECT button at Common to 

display a confirmation box. To save the 

scale, press the SELECT button at “Yes.” 

When Custom is selected, the saved scale 

is used.

  Reset .................  Reset the all adjusted values. Press 

the SELECT button at Reset to display 

a confirmation box. To reset, press the 

SELECT button at “Yes.”

✔

Press the SELECT button at 
Common or Reset, to display a 
confirmation box.