Texas Instruments TPS23752 Evaluation Module TPS23752EVM-145 TPS23752EVM-145 Ficha De Dados
Códigos do produto
TPS23752EVM-145
-
+
DUT
TPS23752EVM-145
J1
J2
J3
J10
VOUT
GND
PSE
Ethernet
Device
(Ethernet Cable)
Wall
Adapter
+
±
TPS23752EVM-145 Performance Data
Table 4. Jumpers
Jumper
Label
Description
J4
J4
D11 LED bias jumper. Installing enables WAKE LED.
J7
J5
D12 LED bias jumper. Installing enables T2P LED. Shunt may be removed when
making efficiency measurements.
making efficiency measurements.
J11
J11
D20 LED bias jumper. Installing enables OUTPUT LED. Shunt may be removed when
making efficiency measurements.
making efficiency measurements.
5.2
Test Setup
shows a typical test setup for the EVM. Connect J1 to the power sourcing equipment (PSE)
Power for the Ethernet device is available at J10 and the pass-through Ethernet data is available at J2.
Figure 3. Typical TPS23752EVM-145 Test Setup
6
TPS23752EVM-145 Performance Data
6.1
Efficiency
, and
illustrate the efficiency of the EVM.
efficiency is measured
between the J1 input interface and J10 output connector while
and
are measured
between TP5/TP6 and J10 to exclude the diode bridge and Ethernet transformer losses.
demonstrates the light-load efficiency improvement provided by the VFO mode.
7
SLVU753 – July 2012
TPS23752EVM-145: Evaluation Module for TPS23752
Copyright © 2012, Texas Instruments Incorporated