Cypress Semiconductor CY3280-MBR3 Manual Do Utilizador

CY3280-MBR3 Evaluation Kit User Guide, Doc. #: 001-89905 Rev. *B

53

Configuration Files and Example Projects

6. Ensure that the I

2

C selection jumpers J13 and J14 are shorted between pins 1 and 2 to allow 

communication with the PSoC 5LP onboard USB-I

2

C bridge.

7. Connect the kit to the EZ-Click 2.0 customizer tool using the following steps.

a. Click the Select Target Device button (

) on the tool bar of EZ-Click 2.0.

b. Select 3.3 V as target power and 400 kHz as I

2

C speed; click OK to connect to the CY3280-

MBR3 EVK, which has the slave address of 0x37.

Figure 5-3.  Connecting the Kit with the Customizer

8. Select Apply Current Config in the Configuration menu to apply the configuration to the kit, as 

illustrated in 

Figure 5-4.  Apply Current Configuration

9. Wait until the message “Device configuration completed successfully” appears on the status bar 

at the bottom of the EZ-Click window, as displayed in 

.