Texas Instruments BQ76PL536PGM-1 Programming Board for BQ76PL536 Lithium-Ion Battery Monitor and Secondary Protection BQ BQ76PL536PGM-1 Ficha De Dados
Códigos do produto
BQ76PL536PGM-1
Software and Hardware Requirements
www.ti.com
1
Software and Hardware Requirements
1.1
Software Requirements
1. Install bq76PL536EVM-3 evaluation software, version 2.1.17 or higher.
2. Install bq76PL536PGM-1 OTP EPROM programming software.
3. Install Aardvark driver.
2. Install bq76PL536PGM-1 OTP EPROM programming software.
3. Install Aardvark driver.
1.2
Hardware Requirements
1. bq76PL536PGM-1 programming board kit
2. bq76PL536EVM-3. See the bq76PL536EVM-3 user's guide for more details.
3. Aardvark Host Adapter
2. bq76PL536EVM-3. See the bq76PL536EVM-3 user's guide for more details.
3. Aardvark Host Adapter
2
Software Installation
2.1
Installing the Aardvark Driver
CAUTION
The Aardvark driver must be installed before attaching the adapter for the first
time.
time.
The Aardvark driver must be installed prior to installing the TI-supplied bq76PL536 evaluation and
bq76PL536 programming software.
bq76PL536 programming software.
From the CD-ROM, run the file /Tools/Aardvark/Drivers/TotalPhaseUSB-v2.xx.exe to install the drivers. If
prompted to do so, plug the Aardvark adapter into an available USB port using the supplied cable. The
port must be a powered port, typically direct from a personal computer (PC). Using a nonpowered USB
hub may not provide sufficient operating current for the Aardvark adapter or EVM to operate correctly.
prompted to do so, plug the Aardvark adapter into an available USB port using the supplied cable. The
port must be a powered port, typically direct from a personal computer (PC). Using a nonpowered USB
hub may not provide sufficient operating current for the Aardvark adapter or EVM to operate correctly.
2.2
Installing the bq76PL536EVM-3 Evaluation Software
From the CD-ROM, run the file /Software/bq76PL536 Evaluation Software x_x_x.msi to install, where the
"x_x_x" is replaced by the current build number. Installation is automatic. This installs the GUI (graphical
user interface) software for the Windows™ operating system. As new versions are released, they may be
installed over the existing version. See the bq76PL536EVM-3 (
"x_x_x" is replaced by the current build number. Installation is automatic. This installs the GUI (graphical
user interface) software for the Windows™ operating system. As new versions are released, they may be
installed over the existing version. See the bq76PL536EVM-3 (
) user's guide for detailed
installation information.
2.3
Installing the bq76PL536PGM-1 Programming Software
From the CD-ROM, run the file /bq76PL536 programmer setup.msi. Installation is automatic. This installs
the GUI software for Windows. As new versions are released, they may be installed over the existing
version.
the GUI software for Windows. As new versions are released, they may be installed over the existing
version.
3
Connecting bq76PL536PGM and bq76PL536EVM Boards
3.1
Connecting bq76PL536EVM-3
See the bq76PL536EVM-3 (
) user's guide.
2
bq76PL536PGM-1 Programming Board
SLUU468 – December 2010
© 2010, Texas Instruments Incorporated