Texas Instruments The ADC10DV200 is a dual 10-Bit, 200 Msps A/D Converter ADC10DV200EB/NOPB ADC10DV200EB/NOPB Ficha De Dados
Códigos do produto
ADC10DV200EB/NOPB
3
http://www.national.com
1.0 Introduction
This Evaluation Board may be used to evaluate the
ADC10DV200, or ADC11DV200. The ADC is one of a
family of 10 and 11 bit converters that provides data at
rates of up to 200MHz. Further reference in this manual
to the ADC10DV200 is meant to also include the other
listed parts unless otherwise specified
The evaluation board is designed to be used with the
WaveVision5™ Data Capture Board which is connected
to a personal computer through a USB port and running
WaveVision5™ software, operating under Microsoft
Windows. The software can perform an FFT on the
captured data upon command and, in addition to a
ADC10DV200, or ADC11DV200. The ADC is one of a
family of 10 and 11 bit converters that provides data at
rates of up to 200MHz. Further reference in this manual
to the ADC10DV200 is meant to also include the other
listed parts unless otherwise specified
The evaluation board is designed to be used with the
WaveVision5™ Data Capture Board which is connected
to a personal computer through a USB port and running
WaveVision5™ software, operating under Microsoft
Windows. The software can perform an FFT on the
captured data upon command and, in addition to a
frequency domain plot, shows dynamic performance in
the form of SNR, SINAD, THD and SFDR. The latest
WaveVision hardware and software is available through
the National Semiconductor website:
the form of SNR, SINAD, THD and SFDR. The latest
WaveVision hardware and software is available through
the National Semiconductor website:
http://www.national.com/store/view_item/index.html?nsid=
WAVEVSN+BRD+5.1
WAVEVSN+BRD+5.1
2.0 Board Assembly
The ADC10DV200 Evaluation Board comes pre-
assembled. Refer to the Bill of Materials in Section 8 for a
description of components, to Figure 1 for major
component placement and to Section 6 for the Evaluation
Board schematic.
assembled. Refer to the Bill of Materials in Section 8 for a
description of components, to Figure 1 for major
component placement and to Section 6 for the Evaluation
Board schematic.
JR507
+5V
ADC10DV200
or
ADC11DV200
J201
CLK
WV5
Connector
JP401
PDA
J401
DF/DCS
JP401
PDA
J101
VREF
J302
Channel A
Input
J301
Channel B
Input
Figure 1. Major Component and Jumper Locations