Texas Instruments DP83630 Evaluation Demo Board DP83630-EVK/NOPB DP83630-EVK/NOPB Ficha De Dados
Códigos do produto
DP83630-EVK/NOPB
7
DP83630 DEMO BOARD USER GUIDE
2.6
LEDs
Various LEDs are provided to assist the user in determining the state of operation of the board.
Table 3 and Figure 6 clarify the relationship between the LEDs and Jumpers.
Table 3 and Figure 6 clarify the relationship between the LEDs and Jumpers.
Table 3. List of LEDs with Jumpers
LED
Associated Jumper Function
D1
Interrupt Indication
D2
MII Power Supply Indication
D13 / D33
J42
GPIO8
D10 / D30
J39
Link (GPIO7)
D7 / D27
J36
Speed (GPIO6)
D4 / D24
J33
Activity (GPIO5)
D12 / D32
J41
GPIO4
D9 / D29
J38
GPIO3
D6 / D26
J35
GPIO2
D3 / D23
J32
GPIO1
Figure 6. LED/Jumper Order
LEDs D3 through D33 can be used to indicate the state of GPIOs 1 through 8. When it is desired
that the LED is “ON” when the GPIO is “LOW”, the associated jumper should be set to the “UP”
state. With this setting a GREEN LED will be illuminated. When it is desired that the LED is “ON”
when the GPIO is “HIGH”, the associated jumper should be set to the “DN” state. In this case, an
AMBER LED has been incorporated in the circuit. Care should be taken when selecting the
LED polarity of the GPIO which also function as strap inputs.
For additional information about the functionality of pins connected to the LEDs (with the
exception of D2), refer to the DP83630 datasheet.
that the LED is “ON” when the GPIO is “LOW”, the associated jumper should be set to the “UP”
state. With this setting a GREEN LED will be illuminated. When it is desired that the LED is “ON”
when the GPIO is “HIGH”, the associated jumper should be set to the “DN” state. In this case, an
AMBER LED has been incorporated in the circuit. Care should be taken when selecting the
LED polarity of the GPIO which also function as strap inputs.
For additional information about the functionality of pins connected to the LEDs (with the
exception of D2), refer to the DP83630 datasheet.