Texas Instruments TPS386040EVM Evaluation Module TPS386040EVM TPS386040EVM Ficha De Dados
Códigos do produto
TPS386040EVM
General Use and Description
www.ti.com
Table 4. EVM Jumpers
Jumper
Description
JP1
EVM input voltage select jumper. Install shunt between pins 2 and 3 (5V) for normal external 5V power supply input
from J14 and J16. Install shunt between pins 1 and 2 (3.3V) when using the USB-GPIO adapter to communicate
with the TPS65055 through J33. USB power from the USB-GPIO adapter is nominally 3.3VDC.
from J14 and J16. Install shunt between pins 1 and 2 (3.3V) when using the USB-GPIO adapter to communicate
with the TPS65055 through J33. USB power from the USB-GPIO adapter is nominally 3.3VDC.
J2
VIN source for TPS3860x0. Install shunt for normal operation.
J22
VIN source for TPS65055 LDO1, LDO2, LDO3, LDO4. Install shunt for normal operation.
J11
Watch Dog Input Select. Place shunt in the LWDT position for the local watch dog timer and place the shunt in the
EXT WDT position for the external watch dog timer source via J10.
EXT WDT position for the external watch dog timer source via J10.
J31
RESET1 output from TPS3860x0. Install shunt between pins 1 and 2 (RESET1) for local LDO3 enable (EN_LDO3)
or remove shunt and connect RESET1 to external power supply enable for system operation. Install shunt between
pins 2 and 3 to always enable LDO3.
or remove shunt and connect RESET1 to external power supply enable for system operation. Install shunt between
pins 2 and 3 to always enable LDO3.
J28
RESET2 output from TPS3860x0. Install shunt between pins 1 and 2 (RESET2) for local LDO2 enable (EN_LDO2)
or remove shunt and connect RESET2 to external power supply enable for system operation. Install shunt between
pins 2 and 3 to always enable LDO2.
or remove shunt and connect RESET2 to external power supply enable for system operation. Install shunt between
pins 2 and 3 to always enable LDO2.
J24
RESET3 output from TPS3860x0. Install shunt between pins 1 and 2 (RESET3) for local LDO1 enable (EN_LDO1)
or remove shunt and connect RESET3 to external power supply enable for system operation. Install shunt between
pins 2 and 3 to always enable LDO1.
or remove shunt and connect RESET3 to external power supply enable for system operation. Install shunt between
pins 2 and 3 to always enable LDO1.
J20
RESET4 output from TPS3860x0. Install shunt between pins 1 and 2 (RESET4) for local DCDC2 enable
(EN_DCDC2) or remove shunt and connect RESET4 to external power supply enable for system operation. Install
shunt between pins 2 and 3 to always enable DCDC2.
(EN_DCDC2) or remove shunt and connect RESET4 to external power supply enable for system operation. Install
shunt between pins 2 and 3 to always enable DCDC2.
J8
SENSE1 input to TPS650x0 derived from TPS65055 LDO2. Install shunt for normal local operation or remove shunt
and connect SNS1 to external supply output for system operation.
and connect SNS1 to external supply output for system operation.
J7
SENSE2 input to TPS650x0 derived from TPS65055 LDO1. Install shunt for normal local operation or remove shunt
and connect SNS2 to external supply output for system operation.
and connect SNS2 to external supply output for system operation.
J6
SENSE3 input to TPS650x0 derived from TPS65055 DCDC2. Install shunt for normal local operation or remove
shunt and connect SNS3 to external supply output for system operation.
shunt and connect SNS3 to external supply output for system operation.
J5
SENSE4L input to TPS650x0 derived from TPS65055 DCDC1. Install shunt for normal local operation or remove
shunt and connect SNS4 to external supply output for system operation.
shunt and connect SNS4 to external supply output for system operation.
J4
SENSE4H input to TPS650x0 derived from TPS65055 DCDC1. Install shunt between pins 2 and 3 (VDCDC1
SNS4H) for normal local operation or install shunt between pins 1 and 2 (NEGVDC SNS4H) to monitor negative
external power supply using J3 and J1.
SNS4H) for normal local operation or install shunt between pins 1 and 2 (NEGVDC SNS4H) to monitor negative
external power supply using J3 and J1.
J34
Enable input for local TPS65055 LDO4. Install shunt for normal operation.
JP2
TPS65055 DCDC1 enable. Install shunt between pins 1 and 2 (HIGH) to enable DCDC1 and between pins 2 and 3
(GND) to disable DCDC1.
(GND) to disable DCDC1.
JP5
Used to select TPS65055 DCDC2 output voltage. Refer to the TPS65055 datasheet for more detail.
JP4
Used with JP3 to select TPS65055 LDO1-LDO4 output voltage. Refer to the TPS65055 datasheet for more detail.
JP3
Used with JP4 to select TPS65055 LDO1-LDO4 output voltage. Refer to the TPS65055 datasheet for more detail.
J26
TPS65055 control signal input. Refer to TPS65055 datasheet for control signal explanation.
6
Evaluation Module for TPS386000 and TPS386040
SLVU341 – October 2009
Copyright © 2009, Texas Instruments Incorporated