Microchip Technology AC162096 Ficha De Dados
Optional Debug Headers
2006-2012 Microchip Technology Inc.
DS51292U-page 49
Header Dimensions
The figures below lists the dimensions for the debug headers. Dimensions are design
values in inches.
values in inches.
If the length and/or width of the debug header is too large a footprint for the target
board, consider using stand-offs, transition sockets or other extenders in the header
connection socket to raise the header above the target.
board, consider using stand-offs, transition sockets or other extenders in the header
connection socket to raise the header above the target.
FIGURE 6:
DIMENSIONS (28/40-PIN) – AC162067
Side
0.062 Typical
0.560
Typical
0.165 Typical
40-Pin Target Pin 1 Located
on Bottom side of Header
on Bottom side of Header
Dimensions are in inches
Top
28-Pin Target Pin 1 Located
on Bottom side of Header
on Bottom side of Header
0.700
0.850
1.800
0.500
0.200
2.300
6-pin Modular Connector
See “Debug Header Connec-
tions” for details.
tions” for details.
ICE
Device
Device