Microchip Technology MCP1256/7/8/9EV Ficha De Dados
Operational Amplifi ers
MCP6H04 Evaluation Board Instrumentation
Amplifi er (ADM00375)
The MCP6H04 Instrumentation Amplifier
board highlights the implementation
of the MCP6H04 in a three op amp
instrumentation amplifier circuit with
buffered reference voltage.
MCP6V01 Thermocouple Auto-Zeroed Reference
Design Board (MCP6V01RD-TCPL)
The MCP6V01 design board demonstrates
how to use a difference amplifier
system to measure Electromotive Force
(EMF) voltage at the cold junction of
thermocouple in order to accurately
measure temperature of the thermocouple bead. The
MCP6V01 auto-zeroed op amp, with its ultra low offset
voltage (V
oS
) and high Common Mode Rejection Ratio
(CMRR), provides a way to capture this measurement.
MCP651 Input Offset Evaluation Board
(MCP651EV-VOS)
This evaluation board provides a simple means to
measure the board's op amp input offset voltage under a
variety of operating conditions. The measured input offset
voltage (V
oST
) includes the input offset voltage specified
in the datasheet (V
oS
) plus changes due to power supply
voltage (PSRR), common mode voltage (CMRR), output
voltage (AOL), input offset voltage drift over temperature
(∆V
oS
/∆T
A
) and 1/f noise.
MCP6V01 Input Offset Demo Board
(MCP6V01DM-VOS)
This demo board provides a simple means to measure
the MCP6V01/2/3 op amps input offset voltage under a
variety of bias conditions. This V
oS
includes the specified
input offset voltage value found in the datasheet plus
changes due to power supply voltage, common mode
voltage, output voltage and temperature.
Digital-to-Analog Converters
MCP4725 SOT-23-6 Evaluation Board (MCP4725EV)
The MCP4725 SOT-23-6 Evaluation Board
is a quick and easy evaluation tool for the
MCP4725 12-bit DAC device. It works with
Microchip's popular PICkit Serial Analyzer or
independently with the customer's applications board. The
PICkit Serial Analzyer is sold separately.
MCP4728 Evaluation Board (MCP4728EV)
This evaluation board allows quick and easy evaluation
of the MCP4728 4-channel 12-bit DAC device. It contains
the MCP4728 device and connection pins for Microchip's
PICkit Serial Analyzer. When the MCP4728 evaluation board
is connected to the PICkit Serial Analyzer and the DAC
input data is entered into the PC Graphical User Interface
program, the serial analyzer automatically sends the user's
data to the DAC device.
Energy Meters
MCP3905A Energy Meter Reference Design
(MCP3905RD-PM1)
This low-cost energy meter board
acts as a stand-alone energy meter
or as the analog front-end design for
LCD microcontroller-based meters.
The MCP3905A design is specified with an energy
measurement error of 0.1% typical across 1:500 dynamic
range for high-accuracy energy meter designs. The board
is compliant with EMC requirements per energy metering
standards IEC62053 and legacy IEC61036, IEC1046
and IEC687.
I/O Expanders
MCP23X17 16-bit GPIO Expander Evaluation Board
(MCP23X17EV)
This board demonstrates the simple
input/output functionality of the
MCP23017 (I
2
C interface) and the
MCP23S17 (SPI interface). The system
demonstrates the simplicity of monitoring four pins
configured as inputs and applying a predetermined pattern
on LEDs connected to the remaining 12 pins configured
as outputs.
Analog Development Tools
14
Quick Guide to Microchip Development Tools