Microchip Technology MA330031-2 Ficha De Dados
2011-2013 Microchip Technology Inc.
DS70000657H-page 409
dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X AND PIC24EPXXXGP/MC20X
I
IL
Input Leakage Current
)
DI50
I/O Pins 5V Tolerant
(
-1
—
+1
A
V
SS
V
PIN
V
DD
,
Pin at high-impedance
DI51
I/O Pins Not 5V Tolerant
(
-1
—
+1
A
V
SS
V
PIN
V
DD
,
Pin at high-impedance,
-40°C
-40°C
T
A
+85°C
DI51a
I/O Pins Not 5V Tolerant
(
-1
—
+1
A
Analog pins shared with
external reference pins,
-40°C
external reference pins,
-40°C
T
A
+85°C
DI51b
I/O Pins Not 5V Tolerant
(
-1
—
+1
A
V
SS
V
PIN
V
DD
,
Pin at high-impedance,
-40°C
-40°C
T
A
+125°C
DI51c
I/O Pins Not 5V Tolerant
(
-1
—
+1
A
Analog pins shared with
external reference pins,
-40°C
external reference pins,
-40°C
T
A
+125°C
DI55
MCLR
-5
—
+5
A
V
SS
V
PIN
V
DD
DI56
OSC1
-5
—
+5
A
V
SS
V
PIN
V
DD
,
XT and HS modes
TABLE 30-11: DC CHARACTERISTICS: I/O PIN INPUT SPECIFICATIONS (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature
(unless otherwise stated)
Operating temperature
-40°C
T
A
+85°C for Industrial
-40°C
T
A
+125°C for Extended
Param
No.
Symbol
Characteristic
Min.
Typ.
Max.
Units
Conditions
Note 1:
The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current can be measured at different input
voltages.
levels represent normal operating conditions. Higher leakage current can be measured at different input
voltages.
2:
Negative current is defined as current sourced by the pin.
3:
See the “
Pin Diagrams
”
section for the 5V tolerant I/O pins.
4:
V
IL
source < (V
SS
– 0.3). Characterized but not tested.
5:
Non-5V tolerant pins V
IH
source > (V
DD
+ 0.3), 5V tolerant pins V
IH
source > 5.5V. Characterized but not
tested.
6:
Digital 5V tolerant pins cannot tolerate any “positive” input injection current from input sources > 5.5V.
7:
Non-zero injection currents can affect the ADC results by approximately 4-6 counts.
8:
Any number and/or combination of I/O pins not excluded under I
ICL
or I
ICH
conditions are permitted
provided the mathematical “absolute instantaneous” sum of the input injection currents from all pins do not
exceed the specified limit. Characterized but not tested.
exceed the specified limit. Characterized but not tested.