Insys GSM EASY 4.1 11-02-01-03-01.027 Manual Do Utilizador
Códigos do produto
11-02-01-03-01.027
General
INSYS GSM 4.2 easy
10
January 07
2.3
Restrictions/Notes
The INSYS GSM 4.2 easy is connected to the Moeller easy device via a serial
interface. Therefore, a memory can not be used at the same time.
The password protection of the easy device may not be activated. If it is activated,
no communication between INSYS GSM 4.2 and the compact controller is
possible. However, the INSYS GSM 4.2 has its own password protection, which
prevents unauthorized persons without knowledge of the exact password from
remotely accessing the compact controller.
The LCD display needs to be in its original state before the Moeller easy controllers
can communicate via their RS232 interface. This means, for example, that if the
controller is put into another condition by hitting keys on the device, or if the
control program is manually modified, the user has to leave all sub menus of the
easy device. Only now can the INSYS GSM 4.2 easy communicate with the easy
device.
As it is possible to intervene in registers of the current easy control program with
the help of SMS commands, we again refer to the documentation of the used
Moeller easy 800 or easy MFD devices. In the easy device, the storage location for
registers can be used twice; the instances of the registers should therefore be
chosen with care to prevent the registers from manipulating each other.
interface. Therefore, a memory can not be used at the same time.
The password protection of the easy device may not be activated. If it is activated,
no communication between INSYS GSM 4.2 and the compact controller is
possible. However, the INSYS GSM 4.2 has its own password protection, which
prevents unauthorized persons without knowledge of the exact password from
remotely accessing the compact controller.
The LCD display needs to be in its original state before the Moeller easy controllers
can communicate via their RS232 interface. This means, for example, that if the
controller is put into another condition by hitting keys on the device, or if the
control program is manually modified, the user has to leave all sub menus of the
easy device. Only now can the INSYS GSM 4.2 easy communicate with the easy
device.
As it is possible to intervene in registers of the current easy control program with
the help of SMS commands, we again refer to the documentation of the used
Moeller easy 800 or easy MFD devices. In the easy device, the storage location for
registers can be used twice; the instances of the registers should therefore be
chosen with care to prevent the registers from manipulating each other.
Recommendation:
Object
Instance
from
from
Bit register M
1
Byte register MB
13
Word register MW
49
Double word register MD
49