Ea Elektro Automatik EA Elektro-Automatik EA-PSI 8160-04 T 1 Output 640W Programmable DC Power Supply, Switched Mode, Tower 09200405 Ficha De Dados
Códigos do produto
09200405
52
© 2006, Elektro-Automatik GmbH & Co. KG
Irrtümer und Änderungen vorbehalten
EN
© 2009, Elektro-Automatik GmbH & Co. KG
10.5 Accessories and options
Note: Details about options and accessories are avaible in se-
Note: Details about options and accessories are avaible in se-
perate user guides.
Following accessories are optionally available:
a) USB-to-Analogue interface UTA12
Galvanically isolated remote control via USB (on PC side) and
a) USB-to-Analogue interface UTA12
Galvanically isolated remote control via USB (on PC side) and
the device internal analogue interface.
b) Digital interface cards
Pluggable and retrofittable, digital interface cards for USB, RS232,
b) Digital interface cards
Pluggable and retrofittable, digital interface cards for USB, RS232,
CAN, GPIB/IEEE (SCPI only) or Ethernet/LAN (SCPI via VXI11)
are available.
Following options are available:
a) High Speed Ramping (models from 1kW)
Increased dynamics of the output voltage by reduced output
a) High Speed Ramping (models from 1kW)
Increased dynamics of the output voltage by reduced output
capacity. It must be pointed out, that other output related values
also increase!
Note: this is a permanent modification which is not switchable.
b) Internal resistance regulation
This option can be purchased subsequently and is unlocked with
Note: this is a permanent modification which is not switchable.
b) Internal resistance regulation
This option can be purchased subsequently and is unlocked with
a code number in the device‘s setup menu.
After it is unlocked, the user can choose between U/I/P or U/I/R
After it is unlocked, the user can choose between U/I/P or U/I/R
operation. The power set value will not be adjustable in U/I/R
mode, it is then only defined as a limit in the device settings.
Note: it will eventually be required to update the device firmware
Note: it will eventually be required to update the device firmware
before the option can be unlocked. Ask your supplier!
Using the power supply