Gw Instek LCR-819 Digital-Multimeter, DMM, LCR-819 Ficha De Dados
Códigos do produto
LCR-819
BASIC
MEASUREMENT
41
The
average of
10 tests
average of
10 tests
The number of averages is displayed in the main
panel and in the AVGE menu icon after a short
processing time.
panel and in the AVGE menu icon after a short
processing time.
2. Press EXIT to exit to the main menu.
Set Nominal Values
Background
The LCR-800 series are able to set nominal values
when using the DELTA and DELTA% measuring
modes. Nominal values can be set to up to 5 digits
including decimal places. Each primary measuring
unit can have the nominal value set.
when using the DELTA and DELTA% measuring
modes. Nominal values can be set to up to 5 digits
including decimal places. Each primary measuring
unit can have the nominal value set.
Panel operation
1. From the main menu, choose the
measuring mode that you wish to
change by pressing (F3) MODE
until the correct measuring mode is
displayed.
change by pressing (F3) MODE
until the correct measuring mode is
displayed.
For example, if L/Q mode is
selected, an inductance (mH)
nominal value can be set.
selected, an inductance (mH)
nominal value can be set.
LCR-800
User
Manual
42
Inductance (L)
H, mH
Capacitance (C)
nF, uF, pF
Impedance
(Z)
Ω, KΩ
Resistance
(R)
Ω, KΩ
3. Press MENU (F5), followed by SORT (F2) and
NOM.VAL (F1).
3. Enter the nominal number using the numerical
pad, followed by ENTER. Up to 5 digits can be
entered.
entered.
0.6800mH
The NOM.VAL key and screen will be updated
when a nominal value is entered.
when a nominal value is entered.
4. Press EXIT to exit to the main
menu.