Freescale Semiconductor Kinetis Evaluation Board FRDM-KL46Z FRDM-KL46Z Manual Do Utilizador
Códigos do produto
FRDM-KL46Z
OSDAUG
OpenSDA User's Guide
Page 5 of 9
SDA_INFO.HTM
Link to the OpenSDA web page that contains the latest documentation, software
drivers, and OpenSDA Applications available from P&E Microcomputer Systems
drivers, and OpenSDA Applications available from P&E Microcomputer Systems
Embedded in this file are id-value pairs that provide detailed information about the
hardware:
hardware:
ID Tag
Description
BOARD
Board name (e.g. FRDM-KL25Z)
BOOTVER Bootloader version
APPNAME Installed application
APPVER
Application version
These values will be available on the web page and they can also be read directly
from the SDA_INFO.HTM file contents.
from the SDA_INFO.HTM file contents.
SERCD89.INF
SERCD89.CAT
These files are Windows driver files for the USB CDC serial communications port
built into the MSD Flash Programmer OpenSDA Application and appear in the root
directory of that Application. These files are available in the MSD Flash Programmer
drive, but not in the BOOTLOADER drive.
built into the MSD Flash Programmer OpenSDA Application and appear in the root
directory of that Application. These files are available in the MSD Flash Programmer
drive, but not in the BOOTLOADER drive.
Note: Some operating systems cache the files on the BOOTLOADER drive. Because of this, files that
were copied to the OpenSDA Bootloader drive may be seen in the file system even though they are not
stored to the non-volatile flash memory of the OpenSDA controller. These files will no longer appear
once power has been cycled to the OpenSDA device.
were copied to the OpenSDA Bootloader drive may be seen in the file system even though they are not
stored to the non-volatile flash memory of the OpenSDA controller. These files will no longer appear
once power has been cycled to the OpenSDA device.
1.2.2 P&E Debug Application
The P&E Debug Application is an OpenSDA Application that provides debugging and a virtual serial port
all in one application. It provides a run-control debug interface that controls the JTAG or SWD debug
interface to the target processor. It also provides a USB communications device class (CDC) interface
that bridges serial communications between the USB Host and a UART serial interface on the target
processor. Several integrated development environments support the P&E Debug Application including
The P&E Debug Application is an OpenSDA Application that provides debugging and a virtual serial port
all in one application. It provides a run-control debug interface that controls the JTAG or SWD debug
interface to the target processor. It also provides a USB communications device class (CDC) interface
that bridges serial communications between the USB Host and a UART serial interface on the target
processor. Several integrated development environments support the P&E Debug Application including
(v10.3 and later),
(v6.40.3 and later),
), as well as software from P&E Microcomputer Systems.
USB Drivers for all P&E Microcomputer Systems debug tools can be found online at
The P&E Debug Application is designed to debug the resident target processor in the OpenSDA system
with limited support for off-board devices within the same processor family as the resident target
processor. P&E’s Multilink and Tracelink hardware interfaces provide higher performance and
additional debug features: