Beha Amprobe AC50A-D Digital-Multimeter, DMM, 3454543 Ficha De Dados

Códigos do produto
3454543
Página de 78
Contents:
1 pce. Amprobe Current Clamp AC50A
2 pce. test leads with probes (red/black)
2 pce. batteries 1,5V IEC LR6
1 pce. Carrying Case
1 pce. users manual

Transport and Storage
•   Please keep the original packaging for later transport, e.g. for calibra-
tion. Any transport damage due to faulty packaging will be excluded 
from warranty claims. 
•   In order to avoid instrument damage, it is advised to remove batteries 
when not using the instrument over a certain time period. However, 
should the instrument be contaminated by leaking battery cells, 
you are kindly requested to return it to the factory for cleaning and 
inspection.
•   Instruments must be stored in dry and closed areas. In the case of an 
instrument being transported in extreme temperatures, a recovery time 
of minimum 2 hours is required prior to instrument operation. 
��
Safety
•   The Amprobe Current Clamp  AC50A  has  been manufactured and 
tested to comply with the safety regulations for electronic measuring 
equipment contained in IEC61010 and EN 61010, and left the factory 
in a safe condition. To maintain this condition, the user must observe 
the safety instructions contained in this users manual.
•   To avoid electric shock, safety measures must be observed when working 
with voltages higher than 60V d.c. or 30 V r.m.s.(42.4 V peak).
•   Before each measurement make sure that the test leads and the ins-
trument are undamaged.
•   Only handle test leads and probes on the grips provided. Avoid touching 
probes under any circumstances.
•   Measurements in dangerous proximity of electrical installations are only 
to be executed when instructed by a responsible electrical specialist, 
and never alone.
•   The relevant safety regulations for electrical plant and equipment must 
be observed during all operations.
•  The instrument must only be used in the specified ranges.
•   Before  opening  the  instrument,  it  must  be  disconnected  from  
all circuits.
•   Protect  the  instrument  from  prolonged  exposure  to  direct  
sunlight.
3