Bk Precision BK-2831E Digital-Multimeter, DMM, VFD 20000 counts CAT II 300 V BK-2831E Ficha De Dados
Códigos do produto
BK-2831E
26
3.6.1 Connections
Assuming the multimeter is under factory default conditions, the basic procedure to measure continuity
is as follows:
1. Connect test leads to
and COM terminals.
2. Select Continuity measurement function by pressing
→
.
3. Connect test leads to the resistance under test as shown in Figure 3-5.
4. Take reading from the display
Figure 3-5
Continuity Measurement
Note:
Source current flows from the
to COM terminals.
3.7 Testing Diode
The multimeter can also be used to measure the forward voltage drop of general-purpose diodes and
the zener voltage of zener diodes. A current range of 0.5 mA will be selected for diode measurement.
Note:
Diode test uses medium reading rate and is fixed.
3.7.1 Connections
Assuming the multimeter is under factory default conditions, the basic procedure to test a diode is as
follows:
1. Connect test leads to
and COM terminals.
2. Press
for diode measurement function.
3. Connect test leads to the diode under test as shown in Figure 3-6.
4. Take a reading from the display.