Benning TRITEST pro Multi-Tester 020052 Ficha De Dados

10/ 2014 

® 

pro 

 



Phase sequence tests can be carried out even with 

the batteries being removed or exhausted.

-  The device is provided with a high-power LED 

torch 6 with can be switched on and off by press-

ing the push-button 7.

-   Do not apply voltage to the device when the bat-

tery compartment is open! 

-  The battery compartment is located on the back of 

the device.

-  Slightly press down the catch  by means of a 

screwdriver and push off the battery compartment 

cover  in downward direction at the same time. 

-  Replace the exhausted batteries by three new 

ones of type AA (LR06). Make sure that the new 

batteries are inserted with correct polarity!

-  Push the battery compartment cover  back onto 

the housing until the catch  locks into place with 

an audible click.

The battery compartment cover  is provided with an 

integrated magnet and a belt clip for attachment of the 

device.

-  Regulations: DIN EN 61010-1 and -031, IEC 

61010-1 and -31, DIN EN 61557-1 and -7, IEC 

61557-1 and -7, DIN EN 62471

-  Nominal voltage range: 400 V to 500 V

-  Measuring category: CAT III 300 V to earth

-  Nominal frequency range f: 50 Hz / 60 Hz 

-  Current consumption: I

s

 < 3.5 mA (500 V)

-  Contamination level: 2

-  Protection category: IP 40 (DIN VDE 0470-1 IEC / 

EN 60529)

4 - first index: protection against access to dan-

gerous parts and protection against solid impuri-

ties of a diameter > 1.0 mm

0 - second index: no protection against water

-  Battery: 3 x 1.5 V batteries of type AA (LR06) 

-  Weight: approx. 250 g

-  Measuring line with test handles: length of approx. 

1,000 mm

-  Operating temperature range: - 15 °C to + 55 °C

-  Storage temperature range: - 15 °C to + 55 °C 

-  Relative air humidity: 20 % to 80 %

Clean the exterior of the device with a clean dry cloth. 

If there is contamination or deposits in the area of the 

battery or the battery housing, clean these areas as 

well by means of a dry cloth.

If the device is stored for a longer period of time, 

remove the batteries from the device!

At the end of product life, dispose of the 

unserviceable device as well as used batte-

ries via appropriate collecting facilities provi-

ded in your community.

tritest-pro_d3.indd   4

24.10.2014   09:08:45