Pico TC08 USB THERMOELEMENT DATA LOGGER PP222 Manual Do Utilizador
Códigos do produto
PP222
Getting Started
4
Copyright © 2005-2012 Pico Technology Limited. All rights reserved.
usbtc08.en
2
Getting Started
2.1
Installing the driver
The driver is installed automatically when you install the PicoLog software.
Alternatively, you can download the driver from our website at
Alternatively, you can download the driver from our website at
2.2
Connecting the USB TC-08
Please note: do not connect the USB TC-08 until you have installed the
software and restarted your PC.
To begin using the USB TC-08, connect it to the USB port on your computer using the
cable provided. Next, connect a thermocouple to one of the thermocouple input
connectors. To complete the installation, select the USB TC-08 unit and thermocouple
type in PicoLog as follows:
cable provided. Next, connect a thermocouple to one of the thermocouple input
connectors. To complete the installation, select the USB TC-08 unit and thermocouple
type in PicoLog as follows:
1.
Start up PicoLog Recorder
2.
Select
New Settings from the File menu.
The
Recording dialog box appears:
3. Click the
OK button.
The
Sampling Rate dialog box appears
4. Click the
OK button.
The
Converter details dialog box appears