Keysight Technologies U1560A Ficha De Dados
4
SCOPE SPECIFICATIONS
[1]
Vertical System: Scope Channels
Bandwidth (–3 dB)
U1602B: DC to 20 MHz
U1604B: DC to 40 MHz
U1604B: DC to 40 MHz
DC vertical gain accuracy
5 mV/div to 20 mV/div: ± 5% full scale
50 mV/div to 100 V/div: ± 3% full scale
50 mV/div to 100 V/div: ± 3% full scale
Scope Channel Triggering
Trigger sensitivity
DC to 5 MHz: 0.8 divisions
U1602B: 5 MHz to 20 MHz – 1 division
U1604B: 5 MHz to 40 MHz – 1 division
U1602B: 5 MHz to 20 MHz – 1 division
U1604B: 5 MHz to 40 MHz – 1 division
SCOPE CHARACTERISTICS
[2]
Acquisition: Scope Channels
Maximum sample rate
100 MSa/s per channel (50 s/div to 250 ns/div)
3
200 MSa/s single channel and interleaved (125 ns/div)
4
Equivalent sample rate
U1604B: 2.5 GSa/s (125 ns/div to 10 ns/div)
Vertical resolution
8 bits
Maximum recording length:
U1602B/U1604B: Up to 125 000 points, viewable on screen with zoom function
Peak detection
5 ns
Average
Selectable in average number of 2, 4, 8, 16, 32, 64, 128, 256
Vertical System: Scope Channels
Analog channels
Channel 1 and Channel 2 simultaneous acquisition
Bandwidth (–3 dB)
U1602B: DC to 20 MHz
U1604B: DC to 40 MHz
U1604B: DC to 40 MHz
AC coupled
< 10 Hz without probe
< 1 Hz with 10 MΩ 10:1 probe
< 1 Hz with 10 MΩ 10:1 probe
Rise time
U1602B: < 17.5 ns
U1604B: < 8.8 ns
U1604B: < 8.8 ns
Single shot bandwidth
U1602B: 20 MHz
U1604B: 40 MHz
U1604B: 40 MHz
Vertical sensitivity
5 mV/div to 100 V/div (1:1 scope probe)
50 mV/div to 1 kV/div (10:1 scope probe)
500 mV/div to 10 kV/div (100:1 scope probe)
50 mV/div to 1 kV/div (10:1 scope probe)
500 mV/div to 10 kV/div (100:1 scope probe)
Maximum input
CAT III 300 Vrms (up to 400 Hz) from terminal to ground
Offset/Dynamic range
± 5 div
Input impedance
1 MΩ I I < 20 pF
Coupling
AC, DC, GND
[1] All specifi cations are warranted. Specifi cations are valid after a 30-minute warm-up period and within a range of ±10 ºC from
fi rmware calibration temperature.
[2] All characteristics are typical performance values and are not warranted. Characteristics are valid after a 30-minute warm-up
period and within a range of ±10 ºC from fi rmware calibration temperature.
[3] Maximum sampling rates are shown here. Sampling rate will vary according to selected time base. For more information, please refer
to User’s and Service Guide.
[4] 200 MS/s sampling rate is only available at 125 ns/div timebase
[5] Number of points displayed will vary according to time base selected. For more information, refer to User’s and Service Guide
fi rmware calibration temperature.
[2] All characteristics are typical performance values and are not warranted. Characteristics are valid after a 30-minute warm-up
period and within a range of ±10 ºC from fi rmware calibration temperature.
[3] Maximum sampling rates are shown here. Sampling rate will vary according to selected time base. For more information, please refer
to User’s and Service Guide.
[4] 200 MS/s sampling rate is only available at 125 ns/div timebase
[5] Number of points displayed will vary according to time base selected. For more information, refer to User’s and Service Guide