Foxconn 45GMX-V Manual Do Utilizador

24

To protect the system BIOS from virus attack, there is a BIOS write-protection mechanism 
provided. SuperBIOS Protect function protects your BIOS from being affected by viruses, e.g. 
CIH.

This option shows the current frequency of CPU.

This option shows the current frequency of FSB.

This option shows the current frequency of DRAM.

This option is used to configure the CPU Clock Ratio. Multiply CPU clock with this ratio, you 
can get the CPU speed. Increase this ratio may overclock your CPU.

This option is used to auto detect PCI slots. When enabled, the system will turn off clock of the 
empty PCI slot to reduce EMI (Electromagnetic Interference).

This option is only used for CPU of which its frequency is more than 3.4 GH�. When you use 
this type of CPU, CPU Clock Ratio value is fixed at 14X. 

You can select different overclock option by this item. The available setting values are : 
[Default], [Manual], [Step1], [Step2] and [Step 3]. 
[Default] - the system will automatically adjust its CPU clock based on the current loading in 

running O/S and application programs. 

[Step 1]  - CPU is overclocked by a BIOS preset value. Each CPU with different speed has its 

own set of preset value.

[Step 2]  - Same definition as [Step 1].
[Step 3]  - Same definition as [Step 1]. 

Phoenix - AwardBIOS CMOS Setup Utility

                                                   Fox Central Control Unit

    

[SuperBIOS-Protect]

 

 

   

Item Help

Help

     SuperBIOS-Protect 

[Disabled]

 

 

 

 

Menu Level    ►

   

[SuperSpeed]

    Current CPU Frequency 

2134MH�

    Current FSB Frequency 

1066M���

    Current DRAM Frequency 

  533MH�

    CPU Clock Ratio 

[ 8 X]

    Auto detect PCI Clk 

[Enabled]

    Ratio Free 

[Disabled]

     Fox Intelligent Stepping  

[Default]

   ► DRAM Configuration 

[Press Enter]

    

CPU Clock 

266MH�

     PCI Express Clock 

100M���

    CPU Voltage Regulator 

Default

    DRAM Voltage Regulator 

Default

    Spread Spectrum 

Enabled

  

  ↑↓→←:Move   Enter:Select    +/-/PU/PD:Value   F10:Save     ESC:Exit   F1:General �elp         

                              

 F5: Previous Values            F7: �ptimi��ed Defaults

Disabled