Hannspree YT07-32E1 Manual Do Utilizador

Turning the Power On/Off 
Press POWER on the remote control or on the front panel to turn on the LCD TV. The power 
indicator changes from red to green. When the power is off, the power indicator changes from 
green to red. 
 
Selecting the Source

 

Press SOURCE on the remote control or on the front panel to select the input signal by the list.   
TV, AV, S, Scart 1-AV, Scart 1-S, Scart 1-RGB, Scart 2-AV, VGA, HDMI, YPbPr/YCbCr 

 

 

 

Press  TV on the remote control can switch back to the TV mode immediately from any other 
input modes. 
 
Adjusting the Volume

 

Press Vol+ on the remote control or Volf on the front panel to increase the volume. Press Vol- 
on the remote control or Vole on the front panel to decrease the volume. 
 
Changing Channels

 

Press CHc/CHd on the remote control or on the front panel to browse through the channels. 
Press CHc to go to the next channel, or CHd to go to the previous channel. User may enter the 
channel number directly using number buttons on the remote control. 
 
List 
Press FAV  on the remote control to go in the channel 01~99 list.  The left side is the channel 
number , the right side is the channel name.  If you want to rearrange the channel order, first 
press c/d to select the channel then press  f to make a yellow mark then press c/d again to 
go to channel you want to swap.  Press e to do the swap. 
 
 

Open the OSD menu to specify various settings for the LCD TV. Some basic operations when 
using the OSD menu includes: 
y

 Press 

MENU to open/close the OSD menu.  

y

 Press 

d/c to select the different item in the OSD menu, press f to enter the submenu. 

y

 Press 

d/c to select the different item in the submenu, press f or e/f to adjust the settings. 

y

 

Press MENU again to exit the OSD menu.