BTR NETCOM 130863-02-E Ficha De Dados
Datenblatt / Data sheet
Produktbeschreibung
Product specification
Abbildungen / Illustration
Maßzeichnung / Dimensions
METZ CONNECT | Im Tal 2| 78176 Blumberg | Germany | www.metz-connect.com
Phone +49 7702 533-0 | Fax +49 7702 533-433
Vertrieb durch / Distributed by: RIA CONNECT GmbH und / and BTR NETCOM GmbH
Montageanleitung / Mounting instruction siehe / see www.metz-connect.com
Phone +49 7702 533-0 | Fax +49 7702 533-433
Vertrieb durch / Distributed by: RIA CONNECT GmbH und / and BTR NETCOM GmbH
Montageanleitung / Mounting instruction siehe / see www.metz-connect.com
Seite/Page 1/2
Kabelverbinder Class F
A
Cable connector Class F
A
130863-02-E
Bestell-Nr. / Part no.
• cable coupler for field assembly Class F
A
for 8 wire cables
• to connect / extend / repair / relocate copper data cables
up to Cat. 7
A
• compliance to Class F
A
up to 1000 MHz according to ISO/IEC
11801 Ed.2.2:2011-06 in connection with Cat. 7
A
copper cables
• for 10 GBit as per IEEE 802.3an
• suitable for Power over Ethernet (PoE, PoE plus and UPoE)
• compact design: diameter 16.8 mm x length 64 mm
• IP67 protected housing in combination with appropriate cables
• refined zinc die-cast housing consisting of three parts only suitable
• suitable for Power over Ethernet (PoE, PoE plus and UPoE)
• compact design: diameter 16.8 mm x length 64 mm
• IP67 protected housing in combination with appropriate cables
• refined zinc die-cast housing consisting of three parts only suitable
for industrial applications
• easy and fast assembly without special tools
• shield connection and strain relief integrated in the housing
• easy connection of data cables AWG 24/1 to 22/1 (solid wire) and
• shield connection and strain relief integrated in the housing
• easy connection of data cables AWG 24/1 to 22/1 (solid wire) and
AWG 24/7 to 22/7 (stranded wire) to insulation displacement
connectors (IDC)
• solid copper wire diameter 0.5 to 0.64 mm
• stranded copper wire diameter 0.61 to 0.76 mm
• conductor diameter up to 1.6 mm
• suitable for cables with an overall diameter of 5.0 to 9.7 mm
• stranded copper wire diameter 0.61 to 0.76 mm
• conductor diameter up to 1.6 mm
• suitable for cables with an overall diameter of 5.0 to 9.7 mm
• feldkonfektionierbarer Kabelverbinder Klasse F
A
für 8-adrige Kabel
• für die Verbindung/Verlängerung/Reparatur/Umverlegung von
Cu-Datenkabeln bis Cat. 7
A
• in Verbindung mit Cat.7
A
Cu-Kabeln wird die Klasse F
A
nach ISO/
IEC 11801 Ed.2.2:2011-06 bis 1000 MHz erfüllt
• für 10 GBit nach IEEE 802.3 an
• geeignet für Power over Ethernet (PoE, PoE plus und UPoE)
• kompakte Bauform: Durchmesser 16,8 mm x Länge 64 mm
• IP67-geschütztes Gehäuse in Verbindung mit geeigneten
• geeignet für Power over Ethernet (PoE, PoE plus und UPoE)
• kompakte Bauform: Durchmesser 16,8 mm x Länge 64 mm
• IP67-geschütztes Gehäuse in Verbindung mit geeigneten
Leitungen
• industrietaugliches veredeltes Zinkdruckgussgehäuse bestehend
aus nur 3 Einzelteilen
• einfachste Konfektion - ohne Spezialwerkzeug
• Schirmanschluss und Zugentlastung im Gehäuse integriert
• montagefreundlicher Anschluss von Datenleitungen AWG 24/1 bis
• Schirmanschluss und Zugentlastung im Gehäuse integriert
• montagefreundlicher Anschluss von Datenleitungen AWG 24/1 bis
22/1 (eindrähtig) und AWG 24/7 bis 22/7 (mehrdrähtig) an IDC
Schneidklemmen
• Leiterdurchmesser Volldraht 0,5 bis 0,64 mm
• Leiterdurchmesser Litze 0,61 bis 0,76 mm
• Aderndurchmesser bis 1,6 mm
• geeignet für Kabelmanteldurchmesser von 5,0 bis 9,7 mm
• Leiterdurchmesser Litze 0,61 bis 0,76 mm
• Aderndurchmesser bis 1,6 mm
• geeignet für Kabelmanteldurchmesser von 5,0 bis 9,7 mm
© 201
3
METZ
CONNECT
- Technische Änderungen vorbehalten! Subjects to modifications!
2013-02-06