Foxconn P45A-S Socket 775 P45A-S Manual Do Utilizador

24

Press <Enter> to go to its submenu.

This option is used to select the priority for boot devices. After pressing <Enter>, you can
select the device using the Up/Down arrow keys, and change the device priority using <+> or
<->; you can exit this menu by pressing <Esc>.

This option is used to specify the boot priority sequence from available hard disk drives.

This option is used to specify the boot priority sequence from available removable drives.

This option is used to specify the boot priority sequence from available CD/DVD drives.

While Enabled, this option allows BIOS to skip certain tests while booting, this will shorten the
time needed to boot the system.

This item is used to enable/disable the quiet boot.
[Disabled] : Displays the normal POST messages.
[Enabled] : Displays OEM customer logo instead of POST messages.

This item controls whether the BIOS will be checking for a floppy drive while booting up. If it 
cannot detect one (either due to improper configuration or physical unavailability), it will ap-
pear an error message. Disabling this function, then POST will not detect the floppy.

This item defines if the keyboard Num Lock key is active when your system is started. The
available settings are: On (default) and Off.

To protect the system BIOS from virus attack, there is a BIOS write-protection mechanism
provided. Super BIOS Protect function protects your BIOS from being affected by viruses, e.g.CIH.

          CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.

                                                   Advanced BIOS Features

   ► CPU Configuration 

[Press Enter]

 

   

Help Item

  ► Boot Device Priority 

[Press Enter]

 

► Hard Disk Drives 

[Press Enter] 

Configure CPU.

  ► Removable Drives 

[Press Enter]

 

► CD/DVD Drives 

[Press Enter] 

 

 

  Quick Boot 

[Enabled] 

   

  Quiet Boot 

[Enabled] 

 

  Floppy Drive Seek 

[Disabled] 

   

 

  Bootup Num-Lock  

[On] 

   

 

  BIOS Write Protect 

[Disabled]   

  

       ↑↓←→:Move   Enter:Select    +/-/:Value   F10:Save   ESC:Exit    F1:General Help    

 

F9:Optimized Defaults

[Press Enter]