Fluke 190-204/EU 4-channel hand-held oscilloscope, ScopeMeter® 190 series II, hand-held 3894409 Manual Do Utilizador
Códigos do produto
3894409
99
Chapter 8
Specifications
Introduction
Performance Characteristics
FLUKE guarantees the properties expressed in numerical
values with the stated tolerance. Specified non-tolerance
numerical values indicate those that could be nominally
expected from the mean of a range of identical
ScopeMeter test tools.
The Test Tool meets the specified accuracy 30 minutes
and two complete acquisitions after power on.
Specifications are based on a 1-year calibration cycle.
FLUKE guarantees the properties expressed in numerical
values with the stated tolerance. Specified non-tolerance
numerical values indicate those that could be nominally
expected from the mean of a range of identical
ScopeMeter test tools.
The Test Tool meets the specified accuracy 30 minutes
and two complete acquisitions after power on.
Specifications are based on a 1-year calibration cycle.
Environmental Data
The environmental data mentioned in this manual are
based on the results of the manufacturer’s verification
procedures.
The environmental data mentioned in this manual are
based on the results of the manufacturer’s verification
procedures.
Safety Characteristics
The test tool has been designed and tested in accordance
with Standards EN/IEC 61010.1 (2001-02) Pollution
Degree 2 (According to CE marking), ANSI/ISA S82.01
(1994), CAN/CSA-C22.2 No. 1010.1 (including approval),
Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use.
This manual contains information and warnings that must
be followed by the user to ensure safe operation and to
keep the instrument in a safe condition. Use of this
equipment in a manner not specified by the manufacturer
may impair protection provided by the equipment.
The test tool has been designed and tested in accordance
with Standards EN/IEC 61010.1 (2001-02) Pollution
Degree 2 (According to CE marking), ANSI/ISA S82.01
(1994), CAN/CSA-C22.2 No. 1010.1 (including approval),
Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use.
This manual contains information and warnings that must
be followed by the user to ensure safe operation and to
keep the instrument in a safe condition. Use of this
equipment in a manner not specified by the manufacturer
may impair protection provided by the equipment.