Extech TKG100Layer-thickness tester, paint-coat measurement TKG100 Ficha De Dados
Códigos do produto
TKG100
Extech Instruments
2
TKG100_TKG150 Ultrasonic Thickness Gauge User Guide v2.8 11/13
WARRANTY
FLIR Systems, Inc. warrants this Extech Instruments brand device to be free
of defects in parts and workmanship for two years from date of shipment (a six
month limited warranty applies to sensors and cables). If it should become
necessary to return the instrument for service during or beyond the warranty period,
contact the Customer Service Department for authorization. Visit the website
contact the Customer Service Department for authorization. Visit the website
www.extech.com for contact information. A Return Authorization (RA) number
must be issued before any product is returned. The sender is responsible for
shipping charges, freight, insurance and proper packaging to prevent damage in
transit. This warranty does not apply to defects resulting from action of the user
transit. This warranty does not apply to defects resulting from action of the user
such as misuse, improper wiring, operation outside of specification, improper
maintenance or repair, or unauthorized modification. FLIR Systems, Inc. specifically
disclaims any implied warranties or merchantability or fitness for a specific purpose
and will not be liable for any direct, indirect, incidental or consequential damages.
and will not be liable for any direct, indirect, incidental or consequential damages.
FLIR’s total liability is limited to repair or replacement of the product. The warranty
set forth above is inclusive and no other warranty, whether written or oral, is
expressed or implied.
The information in this document is subject to change without notice and describes
only the product defined in the introduction of this documentation. This document
is intended for the use of Extech Instruments customers only (a Flir Systems, Inc.
brand) for the purposes of the agreement under which the document is submitted,
and no part of it may be reproduced or transmitted in any form or means without
and no part of it may be reproduced or transmitted in any form or means without
the prior written permission. For information address: Flir Commercial Systems,
Inc. 9 Townsend West, Nashua NH, 03063 U.S.A.
The information or statements given in this document concerning the suitability,
capacity, or performance of the mentioned hardware or software products cannot
be considered binding but shall be defined in the agreement made between Flir
be considered binding but shall be defined in the agreement made between Flir
Systems and the customer. However, Flir Systems has made all reasonable efforts to
ensure that the instructions contained in the document are adequate and free of
material errors and omissions. Flir Systems will, if necessary, explain issues which
may not be covered by the document.
Other product names mentioned in this document may be trademarks of their
respective companies, and they are mentioned for identification purposes only.
respective companies, and they are mentioned for identification purposes only.
Copyright 2013 Flir Systems, Inc., All Rights Reserved
Printed in the United States of America