Timex Ironman Run Trainer 2.0 GPS Technologie GPS heart rate monitor watch with chest strap T5K743 Ficha De Dados
Códigos do produto
T5K743
22
InDIGlo
®
nIGhT-lIGhT
• Press the INDIGLO
®
button to activate the night-light for a few seconds.
• Hold the INDIGLO
®
button until the watch beeps once (about four seconds) to activate Night-Mode
™
for
about eight hours. While Night-Mode
™
is active, press any button to activate the night-light for a few
seconds.
• Hold the INDIGLO
®
button until the watch beeps twice (about six seconds) to activate Constant On. The
night-light stays on for seven to eight hours. Press INDIGLO
®
again to turn off the night-light.
ReseTTInG The WaTCh
If your watch buttons become inoperable, you can reset the watch back to working order while maintaining
almost all of your settings and workout data.
• Simultaneously press all four “corner” buttons (, , BACk, and INDIGLO) for three seconds until the
TIMEx name appears. The watch will reset, and the Time and Date will need to be set.
noTe: All of the watch’s stored data and remaining settings will remain unaffected.
seTTInGs/abouT Menu
You can reset the watch back to the default state. The watch settings will all revert back to the default settings
for the firmware version indicated on your watch. All saved workouts are deleted.
1. From the SETTINGS menu, open ABOUT.
1. From the SETTINGS menu, open ABOUT.
2. Select FACTORy RESET.
3. Select yES.
The next time you press a button after resetting the watch, first-time setup will begin.
DoWnloaDInG WoRkouT DaTa anD RevIeWInG on youR CoMPuTeR
Download workout data to the free online log powered by TrainingPeaks
™
to help you analyze and plan your
training regimen.
1. Create a TrainingPeaks
™
account at:
http://TimexIronman.com/DeviceAgent
2. Connect the charging clip to the watch, then plug the USB cable into the computer.
3. Open the Device Agent on your computer.
4. Select the Run Trainer
3. Open the Device Agent on your computer.
4. Select the Run Trainer
™
2.0 from the Device field, and make sure your account is selected in the username
field.
noTe: Add your new account to the Device Agent by clicking file, then edit login accounts. Click on the
“+” in the Manage user accounts window to add your new account information.
5. Click Download to display the workouts in the watch memory.
6. Leave the boxes checked for those workouts you want sent to your online account and click Save.
7. When the workout transfer is complete, click login to enter the online log, or close the Device Agent and
6. Leave the boxes checked for those workouts you want sent to your online account and click Save.
7. When the workout transfer is complete, click login to enter the online log, or close the Device Agent and
unplug the watch from the computer.