4d Systems Amazing 3.5" Display Module powered by a PIC32 PICadillo-35T Picadillo-35T Ficha De Dados
Códigos do produto
Picadillo-35T
4D SYSTEMS PICadillo-35T Display Module
© 2014 4D SYSTEMS Page 4 of 31 www.4dsystems.com.au
1. Description
The PICadillo-35T is a 3.5” 320x480 resolution (Half
VGA) Embedded Display Module with Resistive
Touch, featuring the Microchip PIC32MX795F512L
32bit
microcontroller,
featuring
Arduino™/
chipKIT™ style headers for easy attachment of
shields, and compatible with UECIDE, MPIDE and
MPLAB X Programming IDE’s.
The PICadillo-35T was designed with complete
system control in mind. It features a 3.5” display
along with a ton of GPIO, making it a perfect
candidate for system control which demands a GUI
or user interface.
The PIC32MX795F512L is a powerful 32bit
microcontroller from Microchip, which has 512Kb
of Flash and 128Kb of SRAM, runs at 80Mhz and is
capable of 105 DMIPS. It features a PMP graphics
port which is used to connect the on board 3.5”
display, allowing for fast graphics fully controlled
by the Users code. The same PIC32 is found on the
popular chipKIT Max32 Development Board.
The PICadillo-35T has been designed to be
programmed using the UECIDE IDE, which is based
on the Arduino IDE however with various
enhancements and improvements. It can also be
used with MPIDE, or even using Microchip MPLAB
X. Using UECIDE or MPIDE, the display module can
essentially be treated as if it was a chipKIT MAX32
and programmed using the familiar programming
language found on the Arduino/chipKIT.
The PICadillo-35T features an on board FTDI USB
to TTL converter for programming and powering
the display, along with an ICSP connection for
using programmers such as the PICKIT3.
Also featured on board is amicroSD connector,
audio amplifier and speaker, RTC oscillator, and
headers in the layout of the chipKit Uno32.
4D Systems highly recommends the UECIDE
Programming IDE, which is available for download
from
shields, and compatible with UECIDE, MPIDE and
MPLAB X Programming IDE’s.
The PICadillo-35T was designed with complete
system control in mind. It features a 3.5” display
along with a ton of GPIO, making it a perfect
candidate for system control which demands a GUI
or user interface.
The PIC32MX795F512L is a powerful 32bit
microcontroller from Microchip, which has 512Kb
of Flash and 128Kb of SRAM, runs at 80Mhz and is
capable of 105 DMIPS. It features a PMP graphics
port which is used to connect the on board 3.5”
display, allowing for fast graphics fully controlled
by the Users code. The same PIC32 is found on the
popular chipKIT Max32 Development Board.
The PICadillo-35T has been designed to be
programmed using the UECIDE IDE, which is based
on the Arduino IDE however with various
enhancements and improvements. It can also be
used with MPIDE, or even using Microchip MPLAB
X. Using UECIDE or MPIDE, the display module can
essentially be treated as if it was a chipKIT MAX32
and programmed using the familiar programming
language found on the Arduino/chipKIT.
The PICadillo-35T features an on board FTDI USB
to TTL converter for programming and powering
the display, along with an ICSP connection for
using programmers such as the PICKIT3.
Also featured on board is amicroSD connector,
audio amplifier and speaker, RTC oscillator, and
headers in the layout of the chipKit Uno32.
4D Systems highly recommends the UECIDE
Programming IDE, which is available for download
from
, which features the
PICadillo-35T as a board for selection from the
plugin system.
NOTE: Arduino, chipKIT and their TM’s remains the
property of the Arduino Team and Digilent inc
respectively. All references to the words Arduino,
chipKIT, Uno32, Max32 and their respective
hardware are licensed under the Creative
Commons Attribution Share-Alike license.
plugin system.
NOTE: Arduino, chipKIT and their TM’s remains the
property of the Arduino Team and Digilent inc
respectively. All references to the words Arduino,
chipKIT, Uno32, Max32 and their respective
hardware are licensed under the Creative
Commons Attribution Share-Alike license.
2. Features
• Powerful 3.5” Embedded LCD-TFT display
module
powered
by
a
Microchip
PIC32MX795F512L 32bit microcontroller.
• 320x480 HVGA Resolution, RGB 65K true to life
colours, TFT Screen with integrated 4-wire
Resistive Touch Panel.
Resistive Touch Panel.
• 512 Kbytes of Flash memory for User
Application Code and Data.
• 128 Kbytes of SRAM.
• 47 General Purpose I/O pins for user interfacing,
which include 13 Analog Inputs.
• Analog Inputs are 0V – 3.3V DC
• chipKIT Uno32 style headers, compatible with
Arduino style shields, for easy interfacing.
• The GPIO is variously configurable for
alternative functions such as:
◦
Up to 4 I
2
C channels available
◦
Up to 3 SPI channels available, with an
additional channel dedicated for the
microSD card.
additional channel dedicated for the
microSD card.
◦
Up to 4 TTL Serial Comm ports available
◦
Up to 4 GPIO for PWM, can also be used
for Audio and Backlight control
for Audio and Backlight control
• On-board FTDI USB to TTL converter for
power/programming.
• Breakout of the PIC32 on-board USB
connections.
• On-board micro-SD memory card connector for
multimedia storage and data logging purposes.
• Mono PWM Audio selectable using 1 of the
PWM channels, filtered and fed to an on-board
1W amplifier, driving an on board speaker.
1W amplifier, driving an on board speaker.
• 5.0V Supply, available to be powered from the
on-board USB port, or 5V DC Jack. Compatible
international 1Amp DC Adaptors are available.
international 1Amp DC Adaptors are available.
• Module dimensions: 56.9 x 97.6 x 15.8mm
(including corner plates). Weighing ~50 g.
• Display Viewing Area: 49.7 x 77.0mm
• 4x corner plates with 2.6mm holes for
mechanical mounting.
• RoHS and CE Compliant.