Atmel SAM4S Xplained Pro Starter and Evaluation Kit ATSAM4S-XPRO ATSAM4S-XPRO Ficha De Dados
Códigos do produto
ATSAM4S-XPRO
295
SAM4S Series [DATASHEET]
Atmel-11100G-ATARM-SAM4S-Datasheet_27-May-14
16.3
Block Diagram
Figure 16-1.
RTC Block Diagram
16.4
Product Dependencies
16.4.1 Power Management
The Real-time Clock is continuously clocked at 32.768 kHz. The Power Management Controller has no effect on
RTC behavior.
16.4.2 Interrupt
RTC interrupt line is connected on one of the internal sources of the interrupt controller. RTC interrupt requires the
interrupt controller to be programmed first.
16.5
Functional Description
The RTC provides a full binary-coded decimal (BCD) clock that includes century (19/20), year (with leap years),
month, date, day, hours, minutes and seconds.
The valid year range is 1900 to 2099 in Gregorian mode, a two-hundred-year calendar(or 1300 to 1499 in Persian
The valid year range is 1900 to 2099 in Gregorian mode, a two-hundred-year calendar(or 1300 to 1499 in Persian
mode).
The RTC can operate in 24-hour mode or in 12-hour mode with an AM/PM indicator.
Corrections for leap years are included (all years divisible by 4 being leap years). This is correct up to the year
The RTC can operate in 24-hour mode or in 12-hour mode with an AM/PM indicator.
Corrections for leap years are included (all years divisible by 4 being leap years). This is correct up to the year
2099.
The RTC can generate configurable waveforms on RTCOUT0/1 outputs.
The RTC can generate configurable waveforms on RTCOUT0/1 outputs.
16.5.1 Reference Clock
The reference clock is Slow Clock (SLCK). It can be driven internally or by an external 32.768 kHz crystal.
During low power modes of the processor, the oscillator runs and power consumption is critical. The crystal
During low power modes of the processor, the oscillator runs and power consumption is critical. The crystal
selection has to take into account the current consumption for power saving and the frequency drift due to
temperature effect on the circuit for time accuracy.
16.5.2 Timing
The RTC is updated in real time at one-second intervals in normal mode for the counters of seconds, at one-
minute intervals for the counter of minutes and so on.
User Interface
32768 Divider
Time
Slow Clock: SLCK
APB
Date
RTC Interrupt
Entry
Control
Interrupt
Control
Clock Calibration
RTCOUT0
RTCOUT1
Wave
Generator
Alarm