Atmel Evaluation Kit AT91SAM9M10-G45-EK AT91SAM9M10-G45-EK Ficha De Dados
Códigos do produto
AT91SAM9M10-G45-EK
1158
SAM9M10 [DATASHEET]
6355F–ATARM–12-Mar-13
46.7.2
Decoder Interrupt Register
Name:
VDEC_DIR
Address:
0x00900004
Access:
Read-write
• DE: Decoder Enable
0: Disables Decoder.
1: Enables Decoder.
Setting this bit high will start the decoding operation. Hardware will reset this bit when a picture is processed, a stream error
or ASO is detected or a bus error is received.
or ASO is detected or a bus error is received.
• ID: Interrupt Disable
0: Enables Interrupts for decoder.
1: Disables Interrupts for decoder.
When high, there will be no interrupts issued by the decoder. Polling must be used to see the hardware status.
• ISET: Decoder Interrupt Set
0:Clears the decoder interrupt.
Software will reset this after the interrupt is handled.
1: Set the decoder interrupt.
This bit drives the interrupt line, OR gated with the post-processor interrupt bit. The interrupt line is not used for the decoder
if the interrupt disable bit for decoder is high.
if the interrupt disable bit for decoder is high.
• DR: Decoder Ready
0: Decoding in progress.
1: Decoder is ready.
When high, the hardware has decoded a picture. Hardware will self-reset.
• BE: Bus Error
0: No error.
1: A bus error has occurred.
When high, hardware has received an error response from the bus while accessing external memory. This is a fatal error
possibly caused by the incorrect allocation of decoder linear memory. Hardware will self-reset.
possibly caused by the incorrect allocation of decoder linear memory. Hardware will self-reset.
• SBE: Stream Buffer Empty
0: Stream Buffer is not empty.
31
30
29
28
27
26
25
24
–
–
–
–
–
–
–
–
23
22
21
20
19
18
17
16
–
–
–
–
–
TO
JPEGSD
ISE
15
14
13
12
11
10
9
8
ASOD
SBE
BE
DR
–
–
–
ISET
7
6
5
4
3
2
1
0
–
–
–
ID
–
–
–
DE