Atmel ATmega328P Xplained Mini MEGA328P-XMINI MEGA328P-XMINI Ficha De Dados
Códigos do produto
MEGA328P-XMINI
233
ATmega48A/PA/88A/PA/168A/PA/328/P [DATASHEET]
Atmel-8271H-AVR- ATmega-Datasheet_08/2014
2-bit prescaler value. The application designer should mask the prescaler bits to zero when checking the Status
bits. This makes status checking independent of prescaler setting. This approach is used in this datasheet,
unless otherwise noted.
bits. This makes status checking independent of prescaler setting. This approach is used in this datasheet,
unless otherwise noted.
• Bit 2 – Reserved
This bit is reserved and will always read as zero.
• Bits 1:0 – TWPS: TWI Prescaler Bits
These bits can be read and written, and control the bit rate prescaler.
To calculate bit rates, see
. The value of TWPS1...0 is used in the
equation.
22.9.4 TWDR – TWI Data Register
In Transmit mode, TWDR contains the next byte to be transmitted. In Receive mode, the TWDR contains the
last byte received. It is writable while the TWI is not in the process of shifting a byte. This occurs when the TWI
Interrupt Flag (TWINT) is set by hardware. Note that the Data Register cannot be initialized by the user before
the first interrupt occurs. The data in TWDR remains stable as long as TWINT is set. While data is shifted out,
data on the bus is simultaneously shifted in. TWDR always contains the last byte present on the bus, except
after a wake up from a sleep mode by the TWI interrupt. In this case, the contents of TWDR is undefined. In the
case of a lost bus arbitration, no data is lost in the transition from Master to Slave. Handling of the ACK bit is
controlled automatically by the TWI logic, the CPU cannot access the ACK bit directly.
last byte received. It is writable while the TWI is not in the process of shifting a byte. This occurs when the TWI
Interrupt Flag (TWINT) is set by hardware. Note that the Data Register cannot be initialized by the user before
the first interrupt occurs. The data in TWDR remains stable as long as TWINT is set. While data is shifted out,
data on the bus is simultaneously shifted in. TWDR always contains the last byte present on the bus, except
after a wake up from a sleep mode by the TWI interrupt. In this case, the contents of TWDR is undefined. In the
case of a lost bus arbitration, no data is lost in the transition from Master to Slave. Handling of the ACK bit is
controlled automatically by the TWI logic, the CPU cannot access the ACK bit directly.
• Bits 7:0 – TWD: TWI Data Register
These eight bits constitute the next data byte to be transmitted, or the latest data byte received on the 2-wire
Serial Bus.
Serial Bus.
22.9.5 TWAR – TWI (Slave) Address Register
The TWAR should be loaded with the 7-bit Slave address (in the seven most significant bits of TWAR) to which
the TWI will respond when programmed as a Slave Transmitter or Receiver, and not needed in the Master
modes. In multi master systems, TWAR must be set in masters which can be addressed as Slaves by other
Masters.
the TWI will respond when programmed as a Slave Transmitter or Receiver, and not needed in the Master
modes. In multi master systems, TWAR must be set in masters which can be addressed as Slaves by other
Masters.
Table 22-7.
TWI Bit Rate Prescaler
TWPS1
TWPS0
Prescaler Value
0
0
1
0
1
4
1
0
16
1
1
64
Bit
7
6
5
4
3
2
1
0
TWD7
TWD6
TWD5
TWD4
TWD3
TWD2
TWD1
TWD0
TWDR
Read/Write
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Initial Value
1
1
1
1
1
1
1
1
Bit
7
6
5
4
3
2
1
0
TWA6
TWA5
TWA4
TWA3
TWA2
TWA1
TWA0
TWGCE
TWAR
Read/Write
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Initial Value
1
1
1
1
1
1
1
0