Olimex USB AVR ISP MKII compatible AVR programmer with ICSP PDI TPI support AVR-ISP-MK2 AVR-ISP-MK2 Ficha De Dados
Códigos do produto
AVR-ISP-MK2
OLIMEX© 2013
AVR-ISP-MK2 user's manual
7. Unplug and plug again AVR-ISP-MK2 from the USB. If you have uploaded the
AVRdude/Linux/Arduino firmware the LEDs would change their behavior and remain lit.
8. Uninstall any previous drivers (selecting delete option) from device manager and scan for
hardware changes or plug/unplug again. Note that for the Jungo drivers you might need to go to
the control panel and uninstall the drivers from “Programs and Features” - the drivers are
called either “Jungo” or “Atmel USB”.
AVRdude/Linux/Arduino firmware the LEDs would change their behavior and remain lit.
8. Uninstall any previous drivers (selecting delete option) from device manager and scan for
hardware changes or plug/unplug again. Note that for the Jungo drivers you might need to go to
the control panel and uninstall the drivers from “Programs and Features” - the drivers are
called either “Jungo” or “Atmel USB”.
9. Install the new drivers corresponding for your needs (the picture below shows how to install the
LibUSB drivers over the Jungo ones – you have to browse to the LibUSB folder and install
anyway)
LibUSB drivers over the Jungo ones – you have to browse to the LibUSB folder and install
anyway)
Page 11 of 22