Mikroelektronika MikroE Development Kits MIKROE-1104 Ficha De Dados

This is information on a product in full production. 

November 2013

DocID15818 Rev 11

ARM-based 32-bit MCU, 150DMIPs, up to 1 MB Flash/128+4KB RAM, USB

OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces & camera

-

• Core: ARM 32-bit Cortex™-M3 CPU (120 MHz 

max) with Adaptive real-time accelerator (ART 
Accelerator™ allowing 0-wait state execution 
performance from Flash memory, MPU, 
150 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1)

• Memories

– Up to 1 Mbyte of Flash memory
– 512 bytes of OTP memory
– Up to 128 + 4 Kbytes of SRAM
– Flexible static memory controller that 

supports Compact Flash, SRAM, PSRAM, 
NOR and NAND memories

– LCD parallel interface, 8080/6800 modes

• Clock, reset and supply management

– From 1.8 to 3.6 V application supply+I/Os
– POR, PDR, PVD and BOR
– 4 to 26 MHz crystal oscillator
– Internal 16 MHz factory-trimmed RC
– 32 kHz oscillator for RTC with calibration
– Internal 32 kHz RC with calibration

• Low power

– Sleep, Stop and Standby modes
– V

BAT

 supply for RTC, 20 × 32 bit backup 

registers, and optional 4 KB backup SRAM

• 3 × 12-bit, 0.5 µs ADCs with up to 24 channels 

and up to 6 MSPS in triple interleaved mode

• 2 × 12-bit D/A converters
• General-purpose DMA: 16-stream controller 

with centralized FIFOs and burst support

• Up to 17 timers

– Up to twelve 16-bit and two 32-bit timers, 

up to 120 MHz, each with up to 4 
IC/OC/PWM or pulse counter and 
quadrature (incremental) encoder input

• Debug mode: Serial wire debug (SWD), JTAG, 

and Cortex-M3 Embedded Trace Macrocell™

• Up to 140 I/O ports with interrupt capability:

– Up to 136 fast I/Os up to 60 MHz
– Up to 138 5 V-tolerant I/Os

• Up to 15 communication interfaces

– Up to 3 × I

2

C interfaces (SMBus/PMBus)

– Up to 4 USARTs and 2 UARTs (7.5 Mbit/s, 

ISO 7816 interface, LIN, IrDA, modem ctrl)

– Up to 3 SPIs (30 Mbit/s), 2 with muxed I

2

S 

to achieve audio class accuracy via audio 
PLL or external PLL

– 2 × CAN interfaces (2.0B Active)
– SDIO interface

• Advanced connectivity

– USB 2.0 full-speed device/host/OTG 

controller with on-chip PHY

– USB 2.0 high-speed/full-speed 

device/host/OTG controller with dedicated 
DMA, on-chip full-speed PHY and ULPI

– 10/100 Ethernet MAC with dedicated DMA: 

supports IEEE 1588v2 hardware, MII/RMII

• 8- to 14-bit parallel camera interface 

(48 Mbyte/s max.)
–

• CRC calculation unit
• 96-bit unique ID

STM32F205xx

STM32F205RB, STM32F205RC, STM32F205RE, 
STM32F205RF, STM32F205RG, STM32F205VB, 
STM32F205VC, STM32F205VE, STM32F205VF STM32F205VG, 
STM32F205ZC, STM32F205ZE, STM32F205ZF, STM32F205ZG

STM32F207xx

STM32F207IC, STM32F207IE, STM32F207IF, STM32F207IG, 
STM32F207ZC, STM32F207ZE, STM32F207ZF, STM32F207ZG, 
STM32F207VC, STM32F207VE, STM32F207VF, STM32F207VG

LQFP64 (10 × 10 mm)

LQFP100 (14 × 14 mm)

LQFP144 (20 × 20 mm)

LQFP176 (24 × 24 mm)

UFBGA176

 (10 × 10 mm)

WLCSP64+2

(0.400 mm pitch)

&"'!