Secutech Radio modules ST002003 Ficha De Dados
Códigos do produto
ST002003
Page 36
Security & Electronic Technologies GmbH
Specification of SECU-DATA 710B
– barrier for supplying the TRbF-
probe
Standard housing for DIN-rail mounting as per EN 50022
Dimensions (W x D x H): 25 x 70 x 103 mm
Material:
Standard housing for DIN-rail mounting as per EN 50022
Dimensions (W x D x H): 25 x 70 x 103 mm
Material:
ABS (Teluran), grey
ATEX-parameters:
Intrinsically safe side (ignition protection: “ia”):
U
Intrinsically safe side (ignition protection: “ia”):
U
O
= 23.1 V, I
O
= 145.8 mA, C
O
= 60 nF, L
O
= 2 mH
Rated specification of the active barrier SECU-BAR 125
Standard housing for DIN-rail mounting as per EN 50022
Dimensions (W x D x H): 25 x 70 x 103 mm
Material:
Standard housing for DIN-rail mounting as per EN 50022
Dimensions (W x D x H): 25 x 70 x 103 mm
Material:
ABS (Teluran), grey
Protection :
IP20
Ambient temperature: -
30°C ≤ T
a
≤ ... +75°C
Electrical specification:
Nominal values:
Nominal values:
U
N
= 24 V
Input voltage:
Range:
18 V… 36 V DC, U
M
= 36 V
Output:
U
O
= 25.2 V, I
O
= 131.3 mA,
C
O
= 107 nF, L
O
= 2 mH
Norms, standards applied
ATEX (EC-directive 94/9/EC), EN 60079-0:2004, EN 60079-11:2007, EN
61241-0:2006, EN 61241-11:2006, EN 60529, ETSI EN 300 220 (EC di-
rective 5/1999/EG R&TTE).
ATEX (EC-directive 94/9/EC), EN 60079-0:2004, EN 60079-11:2007, EN
61241-0:2006, EN 61241-11:2006, EN 60529, ETSI EN 300 220 (EC di-
rective 5/1999/EG R&TTE).
Connectors of SECU-DATA xxxx
Attention: For applications in explosive areas all inputs have to be
connected to intrinsically safe lines only.
The connecting wires (round cables have to be used) are fed into the hous-
ing via cable glands (M16 x 1.5, type SKINTOP) with appropriate strain
relief to a terminal block (type WAGO series 256).
The number of wires and their functionality depends on the SECU-DATA
model, see the appropriate section in this document.
Attention: For applications in explosive areas all inputs have to be
connected to intrinsically safe lines only.
The connecting wires (round cables have to be used) are fed into the hous-
ing via cable glands (M16 x 1.5, type SKINTOP) with appropriate strain
relief to a terminal block (type WAGO series 256).
The number of wires and their functionality depends on the SECU-DATA
model, see the appropriate section in this document.
Cable glands:
Type: SKINTOP
Material: Body: Polyamide, halogen free, sealing: EPDM
Dimensions: M16 x 1.5
Type: SKINTOP
Material: Body: Polyamide, halogen free, sealing: EPDM
Dimensions: M16 x 1.5