Ansmann Digispeed 4 Ultra 5707153 Manual Do Utilizador
Códigos do produto
5707153
the correct polarity and type (NiMH/NiCd). When several cells are to be
charged, they do not need to be inserted at the same time, as the charging
process starts individually. A certain amount of heating of the batteries
during charging is normal. Note the fan will turn off and on and off during
charging. After End of Fast Charge please wait 10 minutes before using
the charger again!
EnvIROnMEnT
EnvIROnMEnT
Rechargeable batteries are not to be disposed of in domestic waste. Return
used batteries to your dealer or even better to a battery collection point.
MAInTEnAncE AnD cLEAnInG
MAInTEnAncE AnD cLEAnInG
To maintain and clean the unit disconnect it from the mains. Only use a
dry cloth for cleaning.
wARRAnTy
wARRAnTy
For this item you have a 3 years warranty. There is no warranty for the
included batteries!!
SPEcIfIcATIOn
SPEcIfIcATIOn
Input voltage:
110-240V AC
Charging current:
Mignon AA NiMH: 4300 mA NiCd: 1000 mA
Micro AAA
NiMH: 1050 mA
NiCd: 250 mA
For best charging results it is recommended to use this charger with
ANSMANN rechargeable batteries!
ATTEnTIOn !
With this charger only fast rechargeable batteries, which are designed
to accept the very high charging currents used with this charger, may be
inserted.
Inferior batteries could cause destruction of rechargeable batteries and the
charger, if the cells used are not suitable for fast charging.
If unsuitable cells are inserted into this charger, warranty claims cannot be
accepted and the warranty will become void.