Gemini PLAY2GO MOBILE PA-ANLAGE Play2Go Ficha De Dados

W W W. G E M I N I S O U N D . C O M

Q U I C K S TA R T   G U I D E

G E M I N I   P L AY

2 G O  

B ox   C o n TA I n S   T h E   f o l l o w I n G : 

• 

PLAY2GO Portable PA

• 

(1) Microphone + cable

• 

(1) Power Cable

1. 

Place the PLAY2GO in the desired location for operation and plug it into a power source or verify the battery is fully 
charged for cord free operation.

2. 

Turn the volume levels on the PLAY2GO down prior to turning the unit on or connecting any input sources.

3. 

Power On the PLAY2GO.

4.  Connect any audio input sources by referencing the setup diagram:

• 

Bluetooth – Press the Bluetooth button for 3 seconds and the blue led will blink and several beeps will be heard as it 
locates another device to connect with. Then consult your device’s operating instructions for finding and connecting to 
another Bluetooth device.

• 

USB – Plug your USB Memory Stick into the correct input and use the controls on the MP3 Player to find and play tracks

• 

SD - Plug your SD Card into the correct input and use the controls on the MP3 Player to find and play tracks

• 

Microphone Inputs – Connect a 1/4” Microphone cable to the input.

• 

AUX Input – Stereo RCA or Stereo RCA to 1/8” cords can be used to connect an external MP3 player or another device. 

5. 

Begin playback on desired device (Begin with the volume low in order to find the ideal level settings on the PLAY2GO 
and your input source).

6.  Turn the volume on the PLAY2GO inputs and master volume up to the desired level.

Microphone Volume

Aux Input Volume

Master Volume

MP3 Player Controls:
Volume +/- , Play/Pause,
Track Search, Mode

Mic 1 & 2 Input:
Connect a 
microphone or 
instrument via 
1/4” cable

Aux Input: 
Connect an 
RCA input

Bluetooth
Enable

SD/USB Input

Battery 
Indicator

Power 
Connector/
Switch