Native Instruments Traktor Kontrol S4 MK2 22400 Ficha De Dados
Códigos do produto
22400
LOOP IN and LOOP OUT Buttons
The LOOP IN and LOOP OUT buttons
The
LOOP IN
and
LOOP OUT
buttons allow you to manually define a Floating Loop in the play-
ing Track Deck / Remix Deck.
Pressing the
Pressing the
LOOP IN button
sets a Floating Cue Point at the current playback position. This
Floating Cue Point will serve as Loop In Point as soon as you press the
LOOP OUT
button.
Hint: The
LOOP IN
button is the perfect tool for setting a Floating Cue Point without stop-
ping the playback, whether you set a Loop Out Point later or not!
Pressing the
LOOP OUT button
sets a Loop Out Point at the current playback position and acti-
vates a Floating Loop between the previously set Floating Cue Point and this Loop Out Point.
You can reuse the same Loop In Point for several Loops: simply set a new Loop Out Point,
and the previous Loop In Point will be used for the new Floating Loop!
The
LOOP IN
and
LOOP OUT
buttons also act as indicator: they light up simultaneously to in-
dicate that a Loop is running. If looping is active but the playback position is outside any
Loop, only the
Loop, only the
LOOP OUT
lights up.
When a Loop is running, you can fine-tune its Loop In and Loop Out Points by holding the cor-
responding button depressed and using the jog wheel:
responding button depressed and using the jog wheel:
►
Hold the
LOOP IN
or
LOOP OUT
button depressed and spin the jog wheel to adjust the
Loop In or Loop Out Point of the running Loop.
Bear in mind that all your actions affect a Floating Loop (and not the original Stored Loop, if
any). Hence, if you plan to use the modified Loop later, don’t forget to store it! For example,
you can do this by assigning the Loop to a Hotcue slot (see section
any). Hence, if you plan to use the modified Loop later, don’t forget to store it! For example,
you can do this by assigning the Loop to a Hotcue slot (see section
).
Storing Loops to a Hotcue slot is only available for Track Decks.
The
LOOP IN
and
LOOP OUT
buttons can also have alternate functions when switched to
Auto Loop mode. You can do this in Preferences > Traktor KONTROL S4 > S4 Control Op-
tions. See section
tions. See section
for more info.
Hardware Reference
The Decks
Traktor Kontrol S4 - Manual - 118