Native Instruments Traktor Kontrol S4 MK2 22400 Ficha De Dados
Códigos do produto
22400
Before you proceed, please follow the steps for the basic setup described in section
.
Connect Your Microphone to the MIC Socket
The MIC socket and its dedicated GAIN knob.
On the rear panel of your S4, plug your microphone into the Microphone socket (
MIC
).
Before you connect your microphone, make sure that the
GAIN
knob next to the
MIC
socket is
turned fully down!
Set the Input Routing in TRAKTOR and Adjust the Microphone Input Level
If you have configured the basic setup via the Setup Wizard, the audio input routing is already
set for your microphone and you can skip this section.
Otherwise, set the input routing as follows:
1.
set for your microphone and you can skip this section.
Otherwise, set the input routing as follows:
1.
Open the Preferences window by clicking on the Preferences button in TRAKTOR’s Head-
er:
er:
2.
Go to Preferences > Input Routing > Input Aux and select 3: In: Mic In (mono) and 4: In:
Mic In (mono) in the
Mic In (mono) in the
L (Mono)
and
R
menu, respectively:
3.
While keeping an eye on the small level meters to the right of the
L (Mono)
and
R
menus,
sing something in your microphone at the loudness at which you will sing during your per-
formance, and adjust the Microphone Gain knob (GAIN) located next to the Microphone
formance, and adjust the Microphone Gain knob (GAIN) located next to the Microphone
Appendix A – Common Setups
Adding a Microphone
Traktor Kontrol S4 - Manual - 199