Philips HTL2163B HTL2163B/12 Ficha De Dados

9

EN

Play audio through Bluetooth

Through Bluetooth, connect the SoundBar with 

your Bluetooth device (such as an iPad, iPhone, 

iPod touch, Android phone, or laptop), and then 

you can listen to the audio files stored on the

device through your SoundBar speakers.
What you need

•  A Bluetooth device which supports 

Bluetooth profile A2DP, AVRCP and with

Bluetooth version as 3.0 + EDR.

•  The maximum operational range between 

the SoundBar and a Bluetooth device is 

approximately 10 meters (30 feet).

1 

Press   on the remote control to switch 

the SoundBar to Bluetooth mode.

 

»

BT is displayed on the display panel, 

blinking.

2 

On the Bluetooth device, switch on 

Bluetooth, search for and select PHILIPS 

HTL2163B to start connection (see the 

user manual of the Bluetooth device on 

how to enable Bluetooth).

 

»

During connection, BT on the display 

panel blinks.

3 

Wait until you hear a beep sound from the 

SoundBar.

 

»

When the Bluetooth connection 

succeeds, BT is displayed on the display 

panel.

 

»

If the connection fails, BT on the 

display panel blinks continuously.

4 

Select and play audio files or music on

your Bluetooth device.

•  During play, if a call is coming, music 

play is paused. Play resumes when the 

call ends.

•  If your Bluetooth device supports 

AVRCP profile, on the remote control

you can press    /   to skip to a track, 

or press 

 to pause/resume play.

5 

To exit Bluetooth, select other source.

•  When your switch back to Bluetooth 

mode, Bluetooth connection remains 

active.

Note

 

•

The music streaming may be interrupted by obstacles 

between the device and SoundBar, such as wall, metallic 

casing that covers the device, or other devices nearby 

that operate in the same frequency.

 

•

If you want to connect your SoundBar with another 

Bluetooth device, press and hold   on the remote 

control to disconnect the currently connected 

Bluetooth device.

MP3 player

Connect your MP3 player to play your audio 

files or music.
What you need

•  An MP3 player.

•  A 3.5mm stereo audio cable.

1 

Using the 3.5mm stereo audio cable, 

connect the MP3 player to the AUDIO IN 

connector on your SoundBar.

2 

Press AUDIO IN on the remote control.

3 

Press the buttons on the MP3 player to 

select and play audio files or music.

USB storage devices

Enjoy audio on a USB storage device, such as an 

MP3 player and USB flash memory, etc.
What you need

•  A USB storage device that is formatted for 

FAT or NTFS file systems, and complies

with the Mass Storage Class.

•  An MP3 or WMA file on a USB storage

device