Philips HTL2163B HTL2163B/12 Ficha De Dados

12 EN

6  Wall mount

Note

 

•

Improper wall mounting may result in accident, injury or 

damage. If you have any query, contact Consumer Care 

in your country.

 

•

Before wall mounting, make sure the wall can support 

the weight of your SoundBar.

 

•

Before wall mount, you need not remove the four 

rubber feet at the bottom of the SoundBar, otherwise 

the rubber feet cannot be fixed back.

Screw length/diameter

Depending on the type of wall mounting your 

SoundBar, make sure that you use screws of a 

suitable length and diameter.

  

See the illustration in the quick start guide on 

how to wall mount the SoundBar.

1) Drill two holes on the wall.

2) Secure the dowels and screws in the holes.

3) Hang the SoundBar on the fastening screws.

> 25mm

3.5-4mm

4mm

7 Product 

specifications

Note

 

•

Specifications and design are subject to change without

notice.

Amplifier

•  Total output power: 

120W RMS (+/- 0.5 dB, 10% THD)

•  Frequency response: 20 Hz-20 kHz / ±3 dB

•  Signal-to-noise ratio: > 65 dB (CCIR) / 

(A-weighted)

•  Input sensitivity:

•  AUX: 900 mV

•  AUDIO IN: 500 mV

Audio

•  S/PDIF Digital audio input:

•  Coaxial: IEC 60958-3

•  Optical: TOSLINK

USB

•  Compatibility: Hi-Speed USB (2.0)

•  Class support: USB Mass Storage Class 

(MSC)

•  File system: FAT16, FAT32, NTFS

•  Supports MP3 and WMA file formats

•  Sampling frequency:

•  MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz, 

22 kHz, 24 kHz, 32 kHz, 44.1 kHz, 

48 kHz

•  WMA: 44.1 kHz, 48 kHz 

•  Constant bit rate:

•  MP3: 8 kbps-320 kbps

•  WMA: 32 kbps-192 kbps

•  Version:

•  WMA: V7, V8, V9