Mc Crypt LED bar No. of LEDs: 320 LB320 LB320 Ficha De Dados

d001 - d512

001-512

Setting the DMX starting address

P--1 - P--7

Setting the DMX operating mode

corl 

 

Operation with fixed colour settings

r000 - r225

Setting the brightness red

G000 - G225

Setting the brightness green

b000 - b225

Setting the brightness blue

Pr01 - Pr26

01 - 26

Setting the effect programme

SP00 - SP20

Setting the effect speed

FS00 - FS20

Setting the strobe speed

Fd00 - Fd20

Setting the fade time

Au-1 - Au-3

1 - 3

Setting the automatic programme

n000 - n100

Setting the loops (programme runs)

SP00 - SP20

Setting the effect speed

FS00 - FS20

Setting the strobe speed

Fd00 - Fd20

Setting the fade time

Su00 - Su20

00 - 20

Setting the sound-to-light programme

SLAE

Slave mode

 Not every parameter can be selected in every programme (see overview).

Each DMX device in a DMX chain requires a so-called DMX starting address to be clearly identified by the controller. 

This DMX starting address specifies the first DMX channel to which the effect light responds. The remaining control 

channels come after this first DMX channel (DMX starting address).

  The effect light requires up to 48 DMX channels depending on DMX operating mode.

Setting the DMX starting address
•  Push the button MODE (6), until dxxx is displayed (xxx defines the DMX start address).
•  Select the desired starting address 001-512 with the UP (8) and DOWN (9) buttons.

Setting the DMX operating mode
•  Push the button SETUP (7), until Pxxx is displayed (xxx defines the DMX start address).
•  Select the desired DMX operating mode P--1 to P--7 with the UP (8) and DOWN (9) buttons.