Smartwares 10.001.40 Manual Do Utilizador
![Smartwares](https://files.manualsbrain.com/attachments/9443e6bd7a3f2bcfc23ae78e329c875a6f5021e5/common/fit/150/50/7d1a4ecd66529cdb3a9f61ef9682d3e6047cfc05823270eb189e1e18501e/brand_logo.gif)
Page 66
Chapter 5 FAQ and Maintenance
5.1 FAQ
If you encounter a problem not listed below, please contact your local customer service or call our
headquarters for assistance. We are more than happy to assist.
1
、
、
、
、
Q: DVR will not start after power-on
A: Possible cause:
1 Input power is not correct
2 Switching power supply has bad wire connection
3 Switching power supply is damaged
4 Upgrade error
5 Damaged hard drive or hard drive cable
6 Front panel failure
7 DVR motherboard failure
2
、
、
、
、
Q: DVR restarts automatically few minutes after being turned on or freezes frequently
A: Possible cause:
1 Input voltage unstable or too low
2 Hard drive has bad tracks or damaged cable
3 Switching power supply has insufficient power
4 Front-end video signal is unstable
5 Poor ventilation; excessive dust; poor operating ambience
6 DVR hardware failure
3
、
、
、
、
Q: Hard drive not detected after startup
A: Possible cause:
1 Hard drive cable is not connected
2 Hard drive cable is damaged
3 Hard drive is damaged
4 Bad motherboard SATA port