Msf Vathauer Antriebstechnik AM 80/4 0.55 KW 20 100027 0029 Ficha De Dados

 

 

MSF-Vathauer Antriebstechnik GmbH & Co KG Am Hessentuch 6 – 8, D-32758 Detmold,  

Postfach 29 22, D -32719 Detmold 

Telefon: ++49 (0) 52 31/63 03-0 + 6 61 93, Telefax ++49 (0) 52 31/6 68 56 

E-Mail: Info@msf-technik.de, Internet: http://www.msf-technik.de 

 

 
3-phase standard squirrel cage Motor conform to the following standards:  
 

- 

Sizes and general conditions VDE 0530 Part 1, IEC 34-1 (1994) 

 

- 

Protection systems DIN VDE 0530 Part 5 IEC 34-5 

 

- 

Cooling systems DIN IEC 34 Part 6 IEC 34-6 (1991) 

 

- 

Structural shapes DIN IEC 34 Part 7 IEC 34-7 Code (1992) 

 

- 

Terminal designation and direction of turn DIN VDE 0530 Part 8, IEC 34-8 (1992) 

 

 
 

The motors are to be protected against mechanical damages and, if possible, they 
are to be stored in closed and dry rooms only. In case of short term outdoor storage 
they have to be protected against all harmful environmental influences. Never 
transport or store the motor on fan cowl. During transportation the motors should be 
kept from any damage. 
 

When pulling a transmission component onto the shaft it is absolutely necessary to 
use an pull-on device or to warm up the component to be pulled on. To prevent shaft, 
bearings and other parts from damages the transmission components must never be 
driven onto the shaft by hammer blows. 
 

All the components attached to the shaft end are to be balanced dynamically. On the 
part of the manufacturer the rotors are balanced with half key. 
 

If possible, the motors are to be installed free from vibrations.  
 

Vent holes and cooling fins are to be kept free and the required minimum distance 
must be observed. It is to be avoided that the heated up cooling air is taken in again. 
In case of installation in the open the motors are to be protected against direct 
environmental influences.