Jumo 60003299 603070/0070-7 60003299 Ficha De Dados
Códigos do produto
60003299
JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14,
Delivery address: Mackenrodtstraße 14,
36039 Fulda, Germany
Postal address:
36035 Fulda, Germany
Phone:
+49 661 6003-0
Fax:
+49 661 6003-607
E-mail:
mail@jumo.net
Internet:
www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow - Essex CM20 2DY, UK
Phone: +44 1279 63 55 33
Fax:
JUMO House
Temple Bank, Riverway
Harlow - Essex CM20 2DY, UK
Phone: +44 1279 63 55 33
Fax:
+44 1279 63 52 62
E-mail:
sales@jumo.co.uk
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
8 Technology Boulevard
Canastota, NY 13032, USA
Phone:
8 Technology Boulevard
Canastota, NY 13032, USA
Phone:
315-697-JUMO
1-800-554-JUMO
1-800-554-JUMO
Fax:
315-697-5867
E-mail:
info@jumo.us
Internet: www.jumo.us
Page 1/15
JUMO heatTHERM-AT and heatTHERM-DR
Type 603070, design as add-on or room thermostat
Particularities
•
-Connection technology - reduced installation time by 50%
• Stable switch point position due to ambient temperature compensation (serial)
• Max. contact rating 16 A, 230 V
• Tested as per DIN EN 14597
• Service life, at least 250,000 switching cycles for TR and TW
• Switch point deviation during the entire service life of max.
±
5%
• Protection class max. IP 54
• UL approval (extra code 061)
Brief description
High application flexibility and latest connection technology are the essential equipment fea-
tures of this new thermostat series.
tures of this new thermostat series.
The thermostat case is suitable for all common installation types such as wall mounting, immer-
sion sleeve and contact fastening. It can be used universally and reduces the variant range be-
cause different mounting types must no longer be taken into account.
sion sleeve and contact fastening. It can be used universally and reduces the variant range be-
cause different mounting types must no longer be taken into account.
The heatTHERM-DR (design 7+8) type is a specific variation with a special housing bottom sec-
tion for top hat rail or wall mounting. This allows an easy mounting on support rails TH35 as per
DIN EN 60715 (e.g. in switch cabinets). This variant considerably reduces the mounting time.
The flue gas temperature monitor heatTHERM-AT locks the gas/oil vessel connected in parallel
with the wood vessel to a chimney.
tion for top hat rail or wall mounting. This allows an easy mounting on support rails TH35 as per
DIN EN 60715 (e.g. in switch cabinets). This variant considerably reduces the mounting time.
The flue gas temperature monitor heatTHERM-AT locks the gas/oil vessel connected in parallel
with the wood vessel to a chimney.
For these worldwide innovative add-on thermostats with "Push-In
®
“ terminal technology, the
connection wires are only inserted into the terminal point up to the stop - done! No tool is re-
quired for connecting the wire or braid with ferrule and the wiring will become more safely. In
this manner, the costs and time required for connection is considerably reduced compared that
of the conventi-onal screw terminal.
quired for connecting the wire or braid with ferrule and the wiring will become more safely. In
this manner, the costs and time required for connection is considerably reduced compared that
of the conventi-onal screw terminal.
The "Push-In
®
“ terminal technology allows direct switching of loads up to 16A at 230V AC. The
installation costs can be reduced further because a contactor is no longer required.
The maintenance costs are reduced by the small distance of approx.10K between switch-off
point and re-switch-on point of the safety temperature limiter.
point and re-switch-on point of the safety temperature limiter.
Available are temperature controllers (TR), temperature monitors (TW), safety temperature mon-
itors (STW), safety temperature limiters (STB) as single or double thermostats and flue gas tem-
perature monitors (ATW).
itors (STW), safety temperature limiters (STB) as single or double thermostats and flue gas tem-
perature monitors (ATW).
Approval as per DIN EN 14 597, DGRL and UL indicate the high quality standards valid for this
product series.
product series.
Type 603070/0170 (TR/STB)
Type 603070/0001 (TR)
Type 603070/ 0002 (TW)
Type 603070/0002 (TW)
Approval/approval marks (see Technical Data)
*only with
extra code
061
extra code
061
Design 5+6*
Design 7+8*
DGRL
97/23/EG
Data sheet 60.3070
2010-06-17/00485235