Jumo 701531/888-22 di 08 Digital Display Instrument 701531/888-22 Ficha De Dados
Códigos do produto
701531/888-22
Page 1/7
M. K. JUCHHEIM GmbH & Co
Delivery address:Mackenrodtstraße 14,
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone:
Phone:
+49 (0) 661 60 03-7 25
Fax:
+49 (0) 661 60 03-6 81
E-Mail:
mail@jumo.net
Internet:
www.jumo.de
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2TT, UK
Temple Bank, Riverway
Harlow, Essex CM20 2TT, UK
Phone: +44 (0) 12 79 63 55 33
Fax:
Fax:
+44 (0) 12 79 63 52 62
E-Mail: info@jumoinstruments.fsnet.co.uk
JUMO PROCESS CONTROL INC.
735 Fox Chase
Coatesville PA 19320, USA
Phone:
Coatesville PA 19320, USA
Phone:
610-380-8002
1-800-554-JUMO
1-800-554-JUMO
Fax:
610-380-8009
E-Mail:
info@JumoUSA.com
Internet: www.JumoUSA.com
Data Sheet 95.1530
10.00/00383037
Block structure
Features
k structured operating
and programming layout
k customer-specific
linearization correction
k 2 limit comparators for
limit monitoring
k digital input filter with
programmable
filter time constant
filter time constant
k time-delayed switching,
programmable per relay
k switch-on delay after
power-on is programmable
JUMO di 32 / di 08
Digital microprocessor indicators
with 1 measurement input
and a maximum of 3 signal outputs,
case for flush-panel mounting to DIN 43 700
with 1 measurement input
and a maximum of 3 signal outputs,
case for flush-panel mounting to DIN 43 700
Brief description
The single-channel digital indicators with the bezel sizes 48mm x 24mm and
96mm x 48mm are available for displaying measurements and monitoring limit values in
industrial applications.
The configurable analog input permits the direct connection of thermocouples, resistance
thermometers, resistance transmitters, potentiometers or transducers with a standard
signal. The sampling rate for the measurement input is 4 measurements per second.
The indicators have a clearly legible 4-digit LED display which, depending on the version,
is 10mm (JUMO di 32) or 20mm (JUMO di 08) high, and serves to display the measure-
ments, as well as being available for dialogs. Only three buttons are used for configuration.
The parameter setting is arranged dynamically, and after two seconds without any oper-
ation the value is accepted automatically.
The front protection is to IP66, at the rear IP20. The electrical connection is by plug-in
screw terminals. The possible input and output configurations are shown in the following
block structure.
96mm x 48mm are available for displaying measurements and monitoring limit values in
industrial applications.
The configurable analog input permits the direct connection of thermocouples, resistance
thermometers, resistance transmitters, potentiometers or transducers with a standard
signal. The sampling rate for the measurement input is 4 measurements per second.
The indicators have a clearly legible 4-digit LED display which, depending on the version,
is 10mm (JUMO di 32) or 20mm (JUMO di 08) high, and serves to display the measure-
ments, as well as being available for dialogs. Only three buttons are used for configuration.
The parameter setting is arranged dynamically, and after two seconds without any oper-
ation the value is accepted automatically.
The front protection is to IP66, at the rear IP20. The electrical connection is by plug-in
screw terminals. The possible input and output configurations are shown in the following
block structure.
Type 951530/...
Type 951531/...