Siemens SPS starter kit 6ED1057-3BA10-0AA8 6ED1057-3BA10-0AA8 Ficha De Dados
Códigos do produto
6ED1057-3BA10-0AA8
Reference material
5.3 Special functions
LOGO!Soft Comfort Online Help
310
Operating Instructions, 06/2014
5.3.6.3
Message text (LOGO! 0BA8)
Short description
This function displays message texts and parameters of other blocks on the LOGO! onboard
display or LOGO! TDE when LOGO! is in RUN mode.
Connection
Description
Input En
A 0 to 1 transition at En (Enable) triggers the output of the message text.
Input P
P is the priority of the message text.
0 is the lowest, 127 the highest priority.
Ack: Acknowledgement of the message text
Parameter
Text: Input of the message text
Par: Parameter or actual value of another, already configured , which can be
Par: Parameter or actual value of another, already configured , which can be
displayed numerically or as a bar graph (see "Visible parameters or actual values")
Time: Shows the continuously updated time-of-day
Date: Shows the continuously updated date
EnTime: Display of the time of the 0 to 1 transition of the signal at input En
EnDate: Display of the date of the 0 to 1 transition of the signal at input En
I/O Status Names: Display of a digital input or output status name, for example "On"
Time: Shows the continuously updated time-of-day
Date: Shows the continuously updated date
EnTime: Display of the time of the 0 to 1 transition of the signal at input En
EnDate: Display of the date of the 0 to 1 transition of the signal at input En
I/O Status Names: Display of a digital input or output status name, for example "On"
or "Off". LOGO! 0BA8 devices can display the status names of following elements:
•
•
Digital inputs
•
Digital outputs
•
Flags
•
Cursor keys
•
LOGO! TDE function keys
•
Shift register bits
•
Function block outputs
Analog Input: Display of analog input value to the shown in message text and
updated according to the analog time.
Scale time: Display of the actual value of a referenced function block as a time value
Scale time: Display of the actual value of a referenced function block as a time value
scaled based on the timebase configured for the message text function block.
Possible time display formats are as shown below:
•
•
hours : minutes : seconds . milliseconds
•
hours : minutes : seconds
•
hours : minutes
•
hours
(for example, "01: 20 : 15 .15")
Symbol: Display of characters selected from the supported character sets
Symbol: Display of characters selected from the supported character sets
Output Q
Q remains set as long as the message text is queued.